Six Sigma as a Method for Controlling and Improving the Quality of Bed Series Products
(1) Universitas Sebelas Maret (Surakarta)
(2) Universitas Sebelas Maret (Surakarta)
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v19i2.11623
Abstract
The research was conducted at PT. XYZ where there were defect problems in bed series products so that additional time is needed to repair a product. One way to make improvements and improve quality in a production process is the Six Sigma method with the stages of DMAIC. The results of the calculated average of DPMO values and Sigma Level have the result 58558.56 and 3.07 which are still not good because still far from 6 sigma. After that analyzing the root causes of defect product problems, then the priority problem is carried out using (RPN) where the highest value is at the assembly work station because the material that has been used up in the warehouse has an RPN of 405 so that it becomes a top priority for repairs. With the standardization and documentation, proposed improvements that have been given then the possible defects of Electric Lovina Bed 3 Motor will be reduced.
Keywords
Full Text:
PDFReferences
Alghamdi, H., Bach, C. (2013). Quality As Competitive Advantage. International Journal of Management & Information Technology, 8 (1), 1265-1272, https://doi.org/10.24297/ijmit.v8i1.690
Amitrano, F.G.X., Estorilio, C.C.A., Bessa, L.D.O.F., Hatakeyama, K. (2015). Six Sigma application in small enterprise. Concurrent Engineering: Research and Applications, 24 (1), 69-82, https://doi.org/10.1177/1063293X15594212
Chiehyeon, L., Min-Jun, K., Ki-Hun, K., Kwang-Jae, K., Paul, M. (2019). Customer process management: A framework for using customer-related data to create customer value. Journal of Service Management, 30 (1), 105-131, https://doi.org/10.1108/JOSM-02-2017-0031
Doshi, J., Desai, D. (2016). Application of Failure Mode & Effect Analysis (FMEA) For Continuous Quality Improvement – Multiple Case Studies In Automobile SMES. International Journal for Quality Research, 11 (2), 345-360, https://doi.org/10.18421/IJQR11.02-07
Erdoğan, A., Canatan, H. (2015). Literature Search Consisting of the Areas of Six Sigma's Usage. Procedia-Social and Behavioral Sciences, 195, 695-704, https://doi.org/10.1016/j.sbspro.2015.06.160
Gaspersz, V. (2002). Guidelines for Implementing Six Sigma Programs (p. 217). Bogor: PT. Gramedia Main Library.
Girmanová, L., Šolc, M., Kliment, J., Divoková, A., Mikloš, V. (2017). Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation. Acta Technologica Agriculturae, 20 (4), 104-109, https://doi.org/10.1515/ata-2017-0020
He, Z., Goh, T.N. (2015). Enhancing the Future Impact of Six Sigma Management. Quality Technology & Quantitative Management, 12 (1), 83-92, https://doi.org/10.1080/16843703.2015.11673368
Hernadewita, H., Mahefud, I., Mohamad, N., Lien, K. (2019). Improvement of magazine production quality using Six Sigma method: case study of a PT.XYZ. Journal of Applied Research on Industrial Engineering, 6 (1), 71-79, http://doi.org/10.22105/jarie.2019.159327.1066
Kaid, H., Noman, M.A., Nasr, E.A., Alkahtani, M. (2016). Six Sigma DMAIC phases application in Y company: a case study. Int. J. Collaborative Enterprise, 5 (3/4), 181-197, https://doi.org/10.1504/IJCENT.2016.082330
Kosina, J. (2013). The Process to Estimate Economical Benefits of Six Sigma Projects. Quality Innovation Prosperity, 17 (1), 16 - 27, http://doi.org/10.12776/qip.v17i1.148
Liliana, L. (2016). A new model of Ishikawa diagram for quality assessment. IOP Conference Series: Materials Science and Engineering, 161 , 1-6, https://doi.org/10.1088/1757-899X/161/1/012099
Mansur, A., Mu'alim, Sunaryo. (2016). Plastic Injection Quality Controlling Using the Lean Six Sigma and FMEA Method. IOP Conference Series: Materials Science and Engineering, 105, 1-10, https://doi.org/10.1088/1757-899X/105/1/012006
Mishra, P., Sharma, R.K. (2014). A Hybrid Framework Based on SIPOC and Six Sigma DMAIC for Improving Process Dimensions in Supply Chain Networks. International Journal of Quality & Reliability Management, 31 (5), 522-546, https://doi.org/10.1108/IJQRM-06-2012-0089
Mitra, A. (2008). Fudamentals of Quality Control and Improvement Third Edition (p. 11). New Jersey: John Wiley & Sons, Inc.
Noori, B., Latifi, M. (2018). Development of Six Sigma methodology to improve grinding processes: A change management approach. International Journal of Lean Six Sigma, 9 (1), 50-63, https://doi.org/10.1108/IJLSS-11-2016-0074
Parast, M.M. (2011). The effect of Six Sigma projects on innovation and firm performance. International Journal of Project Management, 29 (1), 45-55, https://doi.org/10.1016/j.ijproman.2010.01.006
Pepper, M.P.J., Spedding, T.A. (2010). The evolution of lean Six Sigma. International Journal of Quality & Reliability Management, 27 (2), 138-155, https://doi.org/10.1108/02656711011014276
Prabu, K., Makesh, J., Raj, K.N., Devadasan, S.R. (2013). Six Sigma implementation through DMAIC: a case study. International Journal of Process Management and Benchmarking, 3 (3), 386-400, https://doi.org/10.1504/IJPMB.2013.058162
Rehman, F.U., Yusoff, R.B.M., Zabri, S.M., Ismail, F. (2017). Determinants of personal factors in influencing the buying behavior of consumers in sales promotion: a case of fashion industry. Young Consumers : Insight and Ideas for Responsible Marketers, 18 (4), 408-424, https://doi.org/10.1108/YC-06-2017-00705
Sachin, S., Dileepal, J. (2017). Six Sigma Methodology for Improving Manufacturing Process in Foundry Industry. International Journal of Advanced Engineering Research and Science, 4 (5), 131-136, https://dx.doi.org/10.22161/ijaers.4.5.21
Smętkowska, M., Mrugalska, B. (2018). Using Six Sigma DMAIC to Improve the Quality of the Production Process: A Case Study. Procedia - Social and Behavioral Sciences, 238, 590-596, https://doi.org/10.1016/j.sbspro.2018.04.039
Suryoputro, M.R., Khairizzahra, Sari, A.D., Widiatmaka, N.W. (2019). Failure Mode and Effect Analysis (Fuzzy FMEA) Implementation for Forklift Risk Management in Manufacturing Company PT.XYZ. IOP Conference Series: Materials Science and Engineering, 528, 1-8, https://doi.org/10.1088/1757-899X/528/1/012027
Zúñiga, A.A, Baleia, A., Fernandes, J., Branco, P.J.D.C. (2020). Classical Failure Modes and Effects Analysis in the Context of Smart Grid Cyber-Physical Systems. Energies, 13, 1-25, https://doi.org/10.20944/preprints202002.0295.v1
Article Metrics
Abstract view(s): 2876 time(s)PDF: 1472 time(s)
Refbacks
- There are currently no refbacks.