Pengendalian Kualitas Kertas Dengan Menggunakan Statistical Process Control di Paper Machine 3

Vera Devani(1*), Fitri Wahyuni(2),

(1) Jurusan Teknik Industri, UIN Sultan Syarif Kasim Riau, Jl. H.R. Soebrantas No. 155, Simpang Baru Panam, Pekanbaru
(2) Jurusan Teknik Industri, UIN Sultan Syarif Kasim Riau, Jl. H.R. Soebrantas No. 155, Simpang Baru Panam, Pekanbaru
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v15i2.1504

Abstract

Purpose of this research is to determine types and causes of defects commonly found in Paper Machine 3 by using statistical process control (SPC) method.  Statistical process control (SPC) is a technique for solving problems and is used to monitor, control, analyze, manage and improve products and processes using statistical methods.  Based on Pareto Diagrams, wavy defect is found as the most frequent defect, which is 81.7%.  Human factor, meanwhile, is found as the main cause of defect, primarily due to lack of understanding on machinery and lack of training both leading to errors in data input.

Keywords

defect; statistical process control; quality control

Full Text:

PDF

References

Arifianti, R. 2013. “Analisis kualitas produk sepatu Tomkins”. Jurnal Dinamika Manajemen. Vol. 4 (1), pp: 46-58.

Ayuni, D.; Siswandaru, K.; Nupikso, G. 2012. “Analisis penerapan statistical quality control pada beban usaha PT. PLN”. Jurnal Organisasi dan Manajemen. Vol. 8 (1), pp: 22-31.

Bakhtiar, S.; Tahir, S.; dan Hasni, R.A. 2013. “Analisa pengendalian kualitas dengan menggunakan metode statistical quality control (SQC)”. Malikussaleh Industrial Engineering Journal. Vol 2 (1), pp.: 29-36.

Heizer, J.; Render, B. 2005. Manajemen Operasi. Edisi 7. Jakarta: Salemba Empat.

Kartika, H. 2013. “Analisis pengendalian kualitas produk CPE film dengan metode statistical process control pada PT. MSI”. Jurnal Ilmiah Teknik Industri. Vol. 1 (1), pp.: 50-58.

Nasution, M.N. 2005. Manajemen Mutu Terpadu (Total Quality Manajemen). Jakarta: Ghalia Indonesia.

Yamit, Z. 2005. Manajemen Kualitas Produk dan Jasa, Yogyakarta: Ekonisia.

Yuri, M.Z.; Rahmat, N. 2013. TQM Manajemen Kualitas Total dalam Perspektif Teknik Industri. Jakarta: PT. Indeks.

Article Metrics

Abstract view(s): 13961 time(s)
PDF: 18909 time(s)

Refbacks

  • There are currently no refbacks.