Desain Komponen Tambahan Pada Sepeda Untuk Frame Tenda Menggunakan Model Kano

Galuh Masita Sari(1*), Hari Purnomo(2),

(1) Universitas Islam Indonesia
(2) Universitas Islam Indonesia
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v16i1.3849

Abstract

The users of the bike is currently doing a lot of camping in the open sky. Security becomes one of the problems when in nature. Camping cyclists often feel a sense of worry when leaving the bike. Based on these needs, it is necessary additional design part on the bike that made the frame set up the tent. The method used in the design is the canoe method. This method is used to determine the desires of bicycle users based on the level of customer satisfaction to the product of tents and bicycle merging. The results of the study were 13 attributes included in the servqual dimension. Grouping attributes based on canoe categories are 6 attributes including attractive category, 2 must be attributes, 4 one-dimensional attributes, and 1 indifferent attribute. The size of the tents that are made has a length of 200 cm, width 240 cm and height 160 cm.

Keywords

bicycle frame, Kano model, Servqual, tent

References

Afshan, N.; Sindhuja, P.N. (2013). “Integration of Kano’s model into quality function deployment”. The IUP Journal of Operations Management, Vol. 12 (2), pp.: 48 – 56.

Berger, C.; Blauth, T.; Boger, C.; Burchill, G.; DuMouchel, W.; Pouliot, F.; Richter, R.; Rubinoff, A.; Shen, D.; Timko, M.; Walden, D. (1993). “Kano’s methods for understanding customer-defined quality”. Center for Quality Management Journal, Vol. 2 (4), pp.: 3 – 36.

Fajar, A.D. (2011). , A.D. (2011). Desain Prosedur Penilaian Kepuasan Pelanggan Dalam Rangka Implementasi ISO 9001:2008 Dengan Menggunakan Metode Servqual dan Model Kano di Sebuah Perusahaan Jasa Transportasi Alat Berat. Skripsi. Prodi Teknik Industri, Universitas Indonesia.

Gunita, A.P. (2014). Pengembangan Tenda Tak Sentuh Tanah Untuk Penjelajahan Hutan Hujan Tropis Indonesia. Tugas Akhir. Fakultas Seni Rupa dan Desain, Institut Teknologi Bandung.

Hashim, A.Md.; Dawal, S.Z.Md. (2012). “Kano model and QFD integration approach for Ergonomic Design Improvement”. International (Summer) Conference on Business Innovation and Technology Management, Vol. 57, pp.: 22 – 33.

Hsieh, P.L.; Yeh, T.M.; Chen, J.E. (2015). “Integrating fuzzy SERVQUAL into refined Kano model to determine the critical service quality attributes of China restaurants”. Review of Integrative Business and Economics Research, Vol. 4 (4), pp.: 142 – 157.

Ilham, Y.Z.R.; Iqbal, M.; Wulandari, S. (2015). “Analisis kebutuhan pelanggan terhadap produk tas ransel Esgotado tipe Corduro Segundo menggunakan integrasi metode product quality dan Model Kano”. e-Proceeding of Engineering, Vol. 2 (2), Agustus 2015, pp.: 4320 – 4329.

Jiang, L.; Li, W.; Yang, K. (2013). “Product opportunity classification and restructuring method based on AHP and kano model”. Trans Tech Publications, Switzerland. Volume 278-280, pp.: 2278-2282

Laksana, M.B.D. (2008). “Outdoor foodcourt sebagai sarana penunjang pekerjaan pelaksanaan teknis PKL Alun-alun Sidoarjo”. Jurnal Desain Sistem, Tersedia online di http://digilib.its.ac.id/public/ITS-Undergraduate-14180-paperpdf.pdf. diakses pasa 27 Desember 2016.

McClellan, D. (2006). “To peak to grow interest in cycling through product design”. Bycycle retailer and industry news. Pg 41

Mkpojiogu, E.O.C.; Hashim, N.L. (2016). “Understanding the relationship between Kano model’s customer satisfaction scores and self stated requirements importance”. Springer plus, Vol. 5:197, pp.: 1 – 22.

Monica, M.; Alina, S.; Pavel, A. (2013). “Delighting customers by a dfss-oriented customization option in the romanian shoe manufacturing industry”. Journal Expansion European Union, Vol. 18 (8), pp.: 273 – 279.

Tannady, H.; Mulyadi, R. (2015). “Model Kano dalam mengukur kepuasan pelanggan di restauran cepat saji”. Spektrum Industri, Vol. 13 (1), pp.: 1 – 144.

Tontini, G.; Picolo, J.D. (2013). “Identifying the impact of incremental innovations on customer satisfaction using a fusion method between importance-performance analysis and Kano model”. International Journal of Quality & Reliability Management, Vol. 31 (1), pp.: 32 – 52.

Widyaswara, S.K. (2012). “Desain sistem tenda instalasi gawat darurat untuk penanggulangan bencana alam”. Jurnal Desain Idea. Tersedia online di http://digilib.its.ac.id/public/ITS-Undergraduate-17628-Paperpdf.pdf. Diakses pada tanggal 28 Desember 2016.

Wardani, M.K.; Dania, W.K.P.; Effendi, M. (2014). Analisis dan Usulan Perbaikan Kualitas Layanan Menggunakan Model Kano dan Quality Function Deployment (QFD) di Restoran Cepat Saji X Cabang Plaza Surabaya. Skripsi. Universitas Brawijaya, Malang.

Wijaya, D., Santoso, E.F.S.M.; Hidayat, N. (2009). “Penentuan karakteristik produk sebagai bahan pertimbangan dalam perencanaan pengembangan produk kripik tempe: Studi kasus di industri keripik tempe Abadi Malang”. Jurnal FTP-UB. Malang.

Yuan, Y.; Guan, T. (2011). “Design of individualized wheelchairs using AHP and Kano model”. Advances in Mechanical Engineering, Vol. 2014, Article ID 242034.

Zong, L.; Yu, S.; Li, B. (2013). “The model building research of product innovation design quality based on QFD and KANO”. Trans Tech Publications, Switzerland, Vol. 271-272, pp.: 1467 – 1472.

Article Metrics

Abstract view(s): 824 time(s)
PDF (Bahasa Indonesia): 789 time(s)

Refbacks

  • There are currently no refbacks.