Desain Lean Production Dengan Aspek Sustainability dan Logika Fuzzy pada Value Stream Analysis Tools

Famila Dwi Winati(1*), Adhe Rizky Anugerah(2), Dwi Adi Purnama(3),

(1) Universitas Islam Indonesia
(2) 
(3) Universitas Islam Indonesia
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v16i1.3874

Abstract

This article measures and identifies waste and designs alternatives to reduce waste in one SME in Yogyakarta, thus increasing efficiency. The lean manufacturing approach uses Value Stream Mapping that applies sustainability concepts. The research methodology used in this research is case study strategy. Based on the analysis of Current State Mapping there are many activities that are not important and should be reduced. The sustainability aspect in Gendhis Bag covers the environmental aspect with a 10% limit on skin waste and 15% for PVC waste. Energy consumption for production is 750 watts and labor cost is Rp 32,800 per unit. Safety operators have a very small accident rate, while the largest Physical Load Index score is in the cutting department. Future state VSM shows that NNVA and NVA time can be significantly reduced and lead time can be reduced, so production can increase 12 units per day.

Keywords

VALSAT, VSM, fuzzy, sustainability

References

BPS (Badan Pusat Statistik). (2015). Jumlah Perusahaan Industri Mikro dan Kecil Menurut Provinsi, 2013-2015. Tersedia secara Online pada laman https://www.bps.go.id/linkTableDinamis/view/id/1004

[diakses pada 18 Desember 2016].

Beşikçi, E.B. (2016). “An application of fuzzy-AHP to ship operational energy efficiency measures”. Ocean Engineering, Vol. 121, pp.: 392 – 402.

Creswell, J.W. (2003). Research Design: Qualitative, Quantitative, and Mixed Methods Approach (Second Edition ed.). California: Saga Publication.

Commerce, T.U. (2010). The US Department of The International Trade Administration and The U.S. Department of Commerce’s definition for Sustainable Manufacturing. The US Department of Commerce, 2010, “The International Trade Administration and The U.S. Departmen Available via http://www.trade.gov/competitiveness/sustainablemanufacturing/how_doc_defines_SM.as.

De Steur, H.; Wesana, J.; Dora, M.K.; Pearce, D.; Gellynck, X. (2016). “Applying value stream mapping to reduce food losses and wastes in supply chains: A systematic review”. Waste Management, Vol. 58, pp.:359 – 368.

Dotoli, M.; Fanti, M.; Rotunno, G.; Ukovich, W. (2011). “A lean manufacturing procedure using value stream mapping and the analytic hierarchy process”. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Anchorage, Alaska, USA, October 9-12, 2011.

El-Namrouty, K.A.; Abu Shabaan, M.S. (2013). “Seven waste elimination targeted by lean manufacturing case study: Gaza Strip Manufacturing Firms". International Journal of Economics, Finance, and Management Science, Vol. 1 (2), pp.: 68 – 80.

Faulkner, W.; Templeton, W.; Gullett, D.; Badurdeen, F. (2012). “Visualizing Sustainability Performance of Manufacturing System Using Sustainable Value Stream (Sus-VSM)”. Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management. Istanbul, Turkey, July 3-6, 2012.

Fernando, Y.C.; Noya, S. (2014). “Optimasi lini produksi dengan value stream mapping dan value stream analysis tools”. Jurnal Ilmiah Teknik Industri, Vol. 13 (2), pp. 125 – 133.

Hollman, S.K. (1999). “Validation of a questionnaire of assessing physical work load”. Health. Vol. 25 (2), 105-114.

Imai, M. (1986). Kaizen: The Key to Japan’s Competitive Success. New York: McGraw-Hill.

Jasti, N.V.; Sharma, A. (2013). “Lean manufacturing implementation using value stream mapping as a tool: A case study from auto components industry”. International Journal of Lean Six Sigma, Vol. 5 (1), pp. 89 – 116.

Pujotomo, D.; Raditya, A. (2011). “Penerapan lean manufacturing untuk mereduksi waste di industri skala UKM”. J@TI Undip: Jurnal Teknik Industri, Vol. 6 (3), pp.: 137 – 146.

Rivera, L.; Chen, F. (2007). “Measuring the impact of Lean tools on the cost–time investment of a product using cost–time profiles”. Robotics Computer Integration, Vol. 23 (6), pp.: 684 – 689.

Rinawati, D.I.; Sari, D.P.; Nugroho, S.; Muljadi, F.; Lestari, S.P. (2013). “Pengelolaan produksi menggunakan pendekatan lean and green untuk menuju industri batik yang berkelanjutan (Studi kasus di UKM Batik Puspa Kencana)”. J@TI Undip: Jurnal Teknik Industri, Vol. 8 (1), pp. 43 – 50.

Saleh, C.; Astuti, F.H.; Purnomo, M.R.A.; Deros, B.M. (2012). “Fuzzy identification of value stream analysis tools in lean manufacturing”. In Proceeding of 2012 International Conference on Uncertainty Reasoning and Knowledge Engineering, URKE 2012, pp.: 74 – 77.

Womack, J.P.; Jones, D.T.; Roos, D. (1991). The Machine That Changed The World. New York: Harper Perennial.

Article Metrics

Abstract view(s): 1563 time(s)
PDF (Bahasa Indonesia): 1781 time(s)

Refbacks

  • There are currently no refbacks.