Analisis Postur Kerja Dengan Metode Manual Task Risk Assessment (ManTRA) Pada Pembuatan Mie Sohun

Indah Pratiwi(1*), Miftahurrohman Miftahurrohman(2), Much. Djunaidi(3), Suranto Suranto(4),

(1) (SINTA ID: 6012505), Universitas Muhammadiyah Surakarta
(2) 
(3) 
(4) 
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v17i1.6423

Abstract

One of the noodle sohun industry is located in Daleman Village, Klaten District. The process of making is done manually and using a simple tool, through 4 workstations, namely: palm sugar mill work station, palm juice cooking station, cooking station, and printing station. The purpose of the research is to find out the complaints of workers using Nordic Body Map (NBM) , the risk of work posture using the Manual Task Risk Assessment (ManTRA) method, and provide a safe solution to implement. The results of the NBM questionnaire showed that the categories with the very right shoulder pain were 36.4% and the left wrist was 36.4%. The results of the ManTRA method are: the printing work station has the highest musculoskeletal risk, while the lowest risk is on the arsenic squeeze work station.

Keywords

Mie Sohun, Manual Task Risk Assessment (ManTRA), Nordic Body Map (NBM)

References

Ali, S.; Najarkola, M.; Mirzaei, R. (2012). “ManTRA for the Assessment of Musculoskeletal Risk Factors Associated With Manual Tasks in an Electric Factory”. Health Scope International Quarterly Journal, Vol. 1 (3), 132 – 139.

Astuti, S.E.B. (2009). “Gambaran Faktor Risiko Pekerjaan dan Keluhan Gejala Musculoskeletal Disorders (Msds) pada Tubuh Bagian Atas Pekerjaan di Sektor Informal Butik Lamode”. Tugas Akhir. Depok: Universitas Indonesia.

Burgess-limerick, R. (2018). A tale of two acronyms: PErforM and ManTRA: Ron Cumming Memorial Lecture 2004. Ergonomics Australia, (January 2011), pp.9–13.

Dennis, G.; Burgess-limerick, R. (2013). Participative Ergonomics for Manual Tasks (PErforM) Handbook Acknowledgments. Office of Industrial Relations.

Hakim, M.F.; Sitorus, E., (2014). “Rancangan Usulan Stasiun Kerja Ergonomis pada Bagian Pencetakan Menggunakan Metode PAHL dan BEITZ Guna Memperbaiki Postur Kerja Operator”. e-Jurnal Teknik Industri FT-USU, Vol. 2 (1), 9 – 17.

Jumeno, D. (2017). Perbandingan Metode-Metode Evaluasi Postur Kerja. Prosiding SNTI dan SATELIT 2017, 2017, 4 – 6.

Pratiwi, I.; Aprillia, L.; Zulfa, C. (2014). Evaluation Work Posture of Pottery Wokers Uses RULA and REBA Method. Prosiding Seminar Nasional IENACO 2014, 29 – 35.

Pratiwi, I. (2017). Musculoskeletal Disorders Evaluation On The Pembatikan Activity Using Brief Survey Method. Prosiding Seminar Nasional Teknologi Terapan 2017, 147 – 155.

Simanjuntak, R.A. (2012). Penilaian Faktor-Faktor Risiko Pada Saat Melakukan Pekerjaan Dengan Metode ManTRA. Prosiding Seminar Nasional Aplikasi Sains & Teknologi (SNAST) Periode III, 136 – 143.

Sinansari. D.A. (2017). Analisis Resiko Kerja dengan Metode Rapid Upper Limb Assessment (RULA) pada Pembuatan Mie Soun (Studi Kasus: Mie Soun Betty, Manjung Ngawen Klaten). Tugas Akhir. Surakarta: Universitas Muhammadiyah Surakarta.

Article Metrics

Abstract view(s): 2054 time(s)
PDF (Bahasa Indonesia): 1584 time(s)

Refbacks

  • There are currently no refbacks.