PENILAIAN TEKNOLOGI MENGGUNAKAN ANALYTICAL HIERARCHY PROCESS DAN TEKNOMETRIK DI DEPARTEMEN PRODUKSI

Didik Eko Cahyono(1*), Hana Catur Wahyuni(2),

(1) Jurusan Teknik Industri Universitas Muhammadiyah Sidoarjo Kampus II : Jl Raya Gelam 250, Candi, Sidoarjo
(2) Jurusan Teknik Industri Universitas Muhammadiyah Sidoarjo Kampus II : Jl Raya Gelam 250, Candi, Sidoarjo
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v14i2.705

Abstract

Company that will conduct business development needs identification of technology needed, so that development can be in accordance with company objectives. Therefore it is necessary to evaluate the existing technological sophistication.The purpose of this study was to determine the level of sophistication of the individual components of the technology (technoware, humanware, infoware, orgaware) and determine which technology components into a development priority. This study used Analytical Hierarchy Process (AHP) and technometric. Based on the results obtained after performing calculations with AHP and technometric, found that the level of technology component sophistication in the company according to technoware is 0.650, humanware is 0.557, infoware is 0.637, orgaware is 0.693 and the overall level of sophistication or Total Contribution Coefficient (TCC) is approximately 62%. At the current, level of technology at PT XYZ is semi-modern. While the most important technological components to be developed are technoware and lowest component technologies are humanware.

Keywords

technological component; sophistication; analytical hierarchy process; technometric; TCC

References

Alkadri; Riyadi, D.S.; Muchdie; Siswanto, S.; Fathoni, M. 1999. Manajemen Teknologi untuk Pengembangan Wilayah. Jakarta: Pusat Pengkajian Kebijakan Teknologi Pengembangan Wilayah, BPPT.

Aprilianto, H.C.; Santoso, I.; Astuti, R. 2014. “Analisa tingkat kontribusi dalam produksi keripik buah menggunakan metode Technology Coefficient Contribution (TCC) di Kabupaten Malang”. Jurnal Lulusan Teknologi Industri Pertanian, FTP – UB, edisi Oktober 2014, diakses online pada http://skripsitipftp.staff.ub.ac.id/files/2014/10/12.-JURNAL-Hendri-Cahya-Aprilianto.pdf.

Ariwibowo, Y.Y.P. 2005. Aplikasi Pendekatan Teknometrik Technology Contribution Content untuk Menganalisa Manajemen Teknologi pada Divisi Peralatan Industry Agro PT. Barata Indonesia. Skripsi, Teknik Industri, ITS Surabaya.

Firmansyah, R. 2013. “Analisis penentuan sector unggulan perekonomian dengan metode analytical hierarchy process (AHP) dan shift share terhadap pertumbuhan ekonomi”. Jurnal Ilmiah Mahasiswa FEB – UB, Vol. 1 (2), edisi semester genap 2012/2013, diakses online pada http://jimfeb.ub.ac.id/index.php/jimfeb/article/viewFile/2103/1924

Khalil, T.M. 2000. Management of Technology. McGraw-Hill Higher Education

Noer, B.A. 2010. Belajar Mudah Riset Operasional. Yogyakarta: CV. Andi Offset.

Nurmianto, E.; Nasution, A.H.; Syafar, S. 2004. “Perumusan strategi kemitraan menggunakan metode AHP dan SWOT (Studi kasus pada kemitraan PT. INKA dengan industri kecil menengah di wilayah Karesidanan Madiun”. Jurnal Teknik Industri, Vol. 6 (1), pp. 47 – 60.

Ngatawi; Setyaningsih, I. 2011. “Analisis pemilihan supplier menggunakan metode Analytic Hierarchy Process (AHP)”. Jurnal Ilmiah Teknik Industri, Vol. 10 (1), pp. 7 – 13.

Pradana, A.H.; Ciptomulyono, U. 2011. Analisa teknologi sentra industry kerajinan kuningan dengan pendekatan teknometrik untuk penyusunan prioritas pembinaan teknologi di desa Bejijong Kecamatan Trowulan Kabupaten Mojokerto. Skripsi, Jurusan Teknik Industri, Institut Teknologi Sepuluh Nopember (ITS), Surabaya.

Sari, D.P.; Kusumo, S.A. 2011. “Evaluasi pemilihan supplier terbaik menggunakan metode taguchi loss functions dan analitical hierarchy process di PT Indomaju Textindo Kudus”. Jurnal Teknik Industri, Vol. 6 (3), pp. 161 – 170.

Sunarharum, W.B.; Santoso, I. 2004. “Analisa kontribusi teknologi pada industri susu pasteurisasi di KUD. DAU Malang.” Jurnal Teknik Pertanian, Vol. 5 (1), pp. 141 – 150.

Susihono, W. 2012. “Penilaian teknologi untuk menentukan posisi industri pesaing”, Jurnal Teknik Industri, Vol. 7 (2), pp. 131 – 138.

Article Metrics

Abstract view(s): 1696 time(s)
PDF (Bahasa Indonesia): 2333 time(s)

Refbacks

  • There are currently no refbacks.