Penerapan Internet of Things (IoT) sebagai Sistem Monitoring dan Controller pada Kematangan Kerupuk Bandung

Ihsan Ihsan(1*), Angga Wahyu Aditya(2)

(1) Politeknik Negeri Balikpapan
(2) Politeknik Negeri Balikpapan
(*) Corresponding Author

Abstract

In the process of making Bandung Crackers whose interest and existence are still visible in all regions in Indonesia, a method is needed that can help determine the right level of maturity to help make the work of employees in the industry easier. Therefore, the authors compiled this scientific research using a quantitative method that aims to find and design a controller tool systematically based on the Internet of Things (IoT) system, so that revolutionary technology for the industry can develop. Researchers used a monitoring tool in the form of a Type-K Thermocouple Sensor to read the temperature in the boiler, along with the OLED and the Blynk application, as well as the Buzzer Output. Broadly speaking, the Controller tool uses the Blynk application by moving a Servo Motor that has been integrated with the stove knob to adjust the small and large fire remotely. The application of Monitoring and Controller tools in this study is expected to facilitate and provide a sense of security for workers in the Bandung Cracker industry. Through the design of the tools and applications used, researchers can see the temperature from a distance of 1-5 meters. This makes it easy to find out the maturity time during the Bandung Crackers drying process at 1000C as an indicator of proper maturity.

Keywords

Internet of Things (IoT), Monitoring Tool, Controller Tool

Full Text:

PDF

References

Anwar A. N. A., Rizal M., Kurniawan W., “Rancang Bangun Sistem Stabilisasi Nyala Api Pada Kompor Portable Menggunakan Sensor Ultrasonik Dan Sensor Suhu Dengan Metode Fuzzy”, Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, Vol. 2, No. 10, 2018.

Krisdayanes G., “Penggunaan Thermocouple Type K pada Oven Pemanggang Kue Sebagai Sensor Temperatur Berbasis Mikrokontroler ATmega 328’, Repositori Universitas Suamatra Utara, Medan, Indonesia, 2019.

Labiba Z. A., “Rancang Bangun Sistem Monitoring Temperatur Steam Output Terintegrasi HMI (Human Machine Interface) Pada Mini Plant Boiler Di Workshop Instrumentasi”, Doctoral Dissertation, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia, 2017.

Wendi N. dkk, “Alat Pencatat Temperatur Otomatis Menggunakan Termokopel Berbasis Mikrokontroler AT89S51”, Repositori Universitas Udayana, Kampus Bukit Jimbaran, Badung, Bali, Indonesia, 2012.

Priambudi, R. W., Kurniawan, W. D., “Analisa Sistem Pengendalian Temperatur Berbasis Arduino Uno Pada ProtoType Tabung Reaktor”, Pendidikan Teknik Mesin, Fakultas Teknik, Universitas Negeri Surabaya, Indonesia, Vol 10, No 3, Halaman 72-73, 2021.

Rohma F. J., “Rancang Bangun Sistem Kontrol Otomatis Kompor Gas Elpiji Konvensional Pada Proses Perebusan Pada Proses Perebusan Air Berbasis Arduino”, Jurnal Teknik Elektro. S1 Teknik Elektro, Fakultas Teknik, Universitas Negeri Surabaya, Indonesia. Vol 6, No 3, Halaman 165-166, 2017.

Rostini A. N., Junfithrana, A. P., “Aplikasi Smart Home NodeMCU IoT Untuk Blynk”, Jurnal Rekayasa Teknologi Nusa Putra, Universitas Nusa Putra, Sukabumi, Indonesia, Vol 7, No 1, Hal 3, 2020.

Sachari A., Sunarya Y. Y., “Tinjauan Desain”, Penerbit Institut Teknologi Bandung, Indonesia, Hal 171, 2000.

Sari D. P., dkk, “Kendali Suhu Air Dengan Sensor Termokopel Type-k Pada Simulator Sistem Pengisian Botol Otomatis”, Jurnal Ampere. Politeknik Negeri Seriwijaya, Indonesia, Volume 3, Nomor 1, Halaman 123, 2018.

Utara G. S., Wirastuti N. M. A. E. D., Setiawan, W., “ProtoType Monitoring Suhu Ruangan Dan Detektor Gas Bocor Berbasis Aplikasi Blynk”, Jurnal Spektrum. Universitas Udayana, Bali, Indonesia, Volume 7, Nomor 2, Halaman 2-3, 2020.

Rafiuddin S., “Seri Buku Ajar Dasar Dasar Teknik Sensor”, Fakultas Teknik Universitas Hasanuddin, Makasar, Indonesia, 2013.

Anastasia T. U., Mufti A., Rahman, A., “Rancang Bangun Sistem Parkir Otomatis dan Informatif Berbasis Mikrokontroler ATmega2560”, Jurnal Komputer, Informasi Teknologi dan Elektro, Universitas Syiah Kuala, Banda Aceh, Indonesia, Volume 2, Nomor 1, Halaman 29-34, 2017.

Article Metrics

Abstract view(s): 224 time(s)
PDF: 209 time(s)

Refbacks

  • There are currently no refbacks.