RELOCATION OF HOME APPLIANCES FACTORY BY USING SYSTEMATICAL LAYOUT PLANNING (SLP) COMBINED WITH FLOW ANALYSIS AND ASSEMBLY PROCESS DESIGN

Yosef Adji Baskoro(1*), Prianggada Indra Tanaya(2), Tanika D. Sofianti(3),

(1) Faculty of Engineering, Department of INDUSTRIAL ENGINEERING, SWISS GERMAN UNIVERSITY, Campus EduTown BSD City, Tangerang, 15339, Indonesia
(2) Faculty of Engineering, Department of INDUSTRIAL ENGINEERING, SWISS GERMAN UNIVERSITY, Campus EduTown BSD City, Tangerang, 15339, Indonesia
(3) Faculty of Engineering, Department of INDUSTRIAL ENGINEERING, SWISS GERMAN UNIVERSITY, Campus EduTown BSD City, Tangerang, 15339, Indonesia
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v10i2.1257

Abstract

Every manufacturing company must have experiencing building a layout. Fred.E Meyers has stated that only death and taxes are certain, there exist a third certainty-a plant layout will change, thus many methods to generate layout are established and each has its own purposes and benefits. This research focused on the design of manufacturing facilities supported by in-depth analysis of Assembly process design with a high stresses on the Systematical Layout Planning ( SLP) and Flow Analysis method to facilitate an outcome of layout accordingly to the system needs. This is a real case study conducts with an objective of generating a recommendation layout for Home Appliances Company specifically for television plant

Keywords

Systematical Layout Planning; Assembly Process Design; Flow Analysis; Three Dimensional Layout

Full Text:

PDF

References

Freivalds, A. ,2009, Niebel's Methods, Standards, and Work Design. New York: McGraw-Hill.

Hadiguna, R. A., & Setiawan, H., 2008, Tata Letak Pabrik, Yogyakarta: CV. Andi Offset.

Hopp, W. J., & Spearman, M. L., 2008, Factory Physics, New York: McGraw-Hill.

Imai, M., 1997, Genba Kaizen: a common sense low cost approach to management, New York: McGraw-Hill Professional.

Liker, J. K., 2004, The Toyota Way, McGraw-Hill.

Meier, D., & Liker, J. K., 2006, A Practical Guide for Implementing Toyota's 4Ps, Esensi Erlangga Group.

Meyers, F. E., & Stephens, M. P., 2005, Manufacturing Facilities Design and Material Handling. New Jersey: Pearson Prentice Hall.

Neufert, E., Neufert, P., Baiche, B., & Walliman, N., 2002, Architects' Data 3rd Edition, USA: Willey-Blackwell.

Scriabin, M., & Vergin, R. C., 1975, Comparison of Computer Algoritms and Visual Based Methods for Plant Layout. Management Science , 172.

Sutalaksana, I. Z., Anggawisastra, R., & Tjakraatmadja, J. H., 1979, Teknik Tata Cara Kerja, Bandung: Jurusan Teknik Industri Institut Teknologi Bandung.

Tompkins, W., Bozer, F., Tanchocho, & Trevino,1996, Facilities Planning. New York: Wiley & Sons

Article Metrics

Abstract view(s): 345 time(s)
PDF: 366 time(s)

Refbacks

  • There are currently no refbacks.