Optimizing the Preventive Maintenance Scheduling Based on Dynamic Deterministic Demand in The Cement Manufacturing

Halim Qista Karima(1*), Fauzan Romadlon(2),

(1) Institut Teknologi Telkom Purwokerto
(2) 
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v20i1.13894

Abstract

Preventive maintenance is a planned and scheduled maintenance method that is carried out before a machine failure occurs. The maintenance schedule can be determined based on experience, historical data, or recommendations. Selecting the maintenance schedule greatly affects the production system. The Clin machine in cement manufacturing has an important role in the cement production process. During treatment, the client machine cannot produce clinker, so it is necessary to plan a production system to meet the demand. This paper aims to design an optimization model for determining the preventive maintenance schedule for cement manufacturing by considering the production process and inventory control. Mathematical models with binary options are used to model that system. The model supports showing the optimal preventive maintenance schedule for the ciln machines with a binary decision each period. This mathematical model describes the interaction of production planning, inventory control, and scheduling of total maintenance on a kiln machine. The goal of this system is to determine the optimal preventive maintenance schedule with minimum costs. In addition, the system's output is the optimal production and inventory decision rule for each period. Based on the analysis and simulation of the model with the deterministic and dynamic demand, the optimal preventive maintenance schedule is in the 9th and 21st periods. The kiln machines are maintained every July with minimal costs. The model scenario shows the interaction of the variables and the sensitivity of the production capacity and demand to the decision rule of the variable.

Keywords

Optimization; Preventive Maintenance; Production Process: Cement Manufacturing

Full Text:

PDF

References

Anthony, C. (1992). Teknik Manajemen Pemeliharaan. Erlangga.

Assauri, S. (2008). Manajemen Produksi dan Operasi. Universitas Indonesi.

Bevilacqua, M., & Braglia, M. (2000). The analytic hierarchy process applied to maintenance strategy selection. 70, 71–83.

Daellenbach, H. G., & McNickle, D. C. (2005). Management Science Decision Making Through Systems Thinking. PALGRAVE MACMILLAN.

Drastiawati, N. S., Handiwi, R., & Priambodo, J. D. (2020). Proses Normalisasi Axial Load Kiln dan Maintenance Drag Bucket ( Pan Conveyor ) Untuk Menjamin Kesiapan Operasional Peralatan Produksi Semen. Indonesian Journal of Engineering and Technology (INAJET), 2(2), 36–44.

Galankashi, M. R., & Khorramrouz, F. (2020). Maintenance strategy selection in a cement company : An integrated AHP-FAHP approach Maintenance Strategy Selection in a Cement Company : An Integrated AHP-FAHP Approach. 030197(April).

Gustavsson, E., Patriksson, M., Strömberg, A. B., Wojciechowski, A., & Önnheim, M. (2014). Preventive maintenance scheduling of multi-component systems with interval costs. Computers and Industrial Engineering, 76, 390–400. https://doi.org/10.1016/j.cie.2014.02.009

H. Paul Williams. (2013). Model Building in Mathematical Programming (Fifth Edit). A John Wiley & Sons, Ltd., Publication.

Hamdy A. Taha. (2007). Operations Research : An Introduction. Pearson Education, Inc.

Hariawan, J. B. (2007). Pengaruh Perbedaan Karakteristik Type Semen Ordinary Portland Cement ( OPC ) dan Portland Composite Cement ( PCC ) Terhadap Kuat Tekan Mortar.

Javanmard, H., & Koraeizadeh, A. al W. (2016). Optimizing the Preventive Maintenance Scheduling by Genetic Algorithm Based on Cost and Reliability in National Iranian Drilling Company. Journal of Industrial Engineering International, 12(4), 509–516. https://doi.org/10.1007/s40092-016-0155-9

Jong, C. H., Medina, N., Fakhriyah, N., Hidayat, C., & Hamali, S. (2018). Using Goal Programming Method for Optimization of Production Planning. Proceedings of 2018 International Conference on Information Management and Technology, ICIMTech 2018, September, 155–159. https://doi.org/10.1109/ICIMTech.2018.8528156

Li, B., Ji, Q., & Arreola-Risa, A. (2020). Optimizing a production-inventory system under a cost target. Computers and Operations Research, 123. https://doi.org/10.1016/j.cor.2020.105015

Liu, Y., Zhao, Y., Li, K., & Yu, S. (2020). Optimization and Application of Flexible Production Line Production Scheduling. Chinese Control Conference, CCC, 2020-July(61603262), 1472–1476. https://doi.org/10.23919/CCC50068.2020.9188497

Ma, Z. Q., Yang, Z. G., & Yang, Y. (2010). The Production Plan of Distributed Enterprise. 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, 3454–3457. https://doi.org/10.1109/MACE.2010.5536841

Popov, A. P., Popova, T. A., Krapostin, A. A., & Kulikov, M. Y. (2019). Application of Information Systems for Optimization of Intelligent Production Systems. Proceedings of the 2019 IEEE International Conference Quality Management, Transport and Information Security, Information Technologies IT and QM and IS 2019, 439–441. https://doi.org/10.1109/ITQMIS.2019.8928327

Rangkuti, F. (2000). Business Plan: Teknik Membuat Perencanaan Bisnis dan Analisis Kasus. PT Gramedia Pustaka Utama.

Rianthong, N., & Dumrongsiri, A. (2012). A Mathematical Model for Optimal Production, Inventory and Transportation Planning with Direct Shipment. 2nd International Conference on Economics, Trade and Development, 36, 23–27. http://www.ipedr.com/vol36/005-ICETD2012-D00014.pdf

Romadlon, F., Kurniawan, H., & Ananda, R. (2020). Analysis of Postponement Practice in Cement Supply Chain: A Case Study. Jurnal Ilmiah Teknik Industri, 19(2), 176–185. https://doi.org/10.23917/jiti.v19i2.11343

Wirdianto, E., Mukhti, I. N. P., Adi, A. H. B., & Milana, M. (2020). Model Penjadwalan Pemeliharaan Preventif Mesin-Mesin Produksi untuk Meminimasi Total Tardiness. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 20(1), 123–136. https://doi.org/10.24036/invotek.v20i1.629

Wu, Y., & Wang, D. (2011). A Mathematical Programming Model for Optimization Problem of Production Process Based on Time Constraints in Pinggao Pinggao Co., Ltd. ICEMMS 2011 - Proceedings: 2011 2nd IEEE International Conference on Emergency Management and Management Sciences, 258–261. https://doi.org/10.1109/ICEMMS.2011.6015670

Article Metrics

Abstract view(s): 792 time(s)
PDF: 504 time(s)

Refbacks

  • There are currently no refbacks.