Work Facility Design of the Ergonomic Tempeh Plastic Wraps Punching Tool Reduces Musculoskeletal Complaints and Working Time (A Case Study at MSME HM Tempe Murni, Ngoto, Yogyakarta)
(1) Universitas Ahmad Dahlan
(2)
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v21i2.19744
Abstract
Abstract. Tempe Murni small unit is a tempeh processing business located in Ngoto, Bangunharjo, Sewon, Bantul, Yogyakarta. There was a work process which caused muscle fatigue on the process of making holes on the tempeh wraps using manual tool because it had not met the ergonomic standard. The work posture of the workers in doing the work was sitting on the floor, the left leg was folded inward and the right leg was stretched forward a little bit, thus, it might cause musculoskeletal complaints. Therefore, it required an ergonomic tempeh plastic wrap punching tool which could reduce the musculoskeletal complaints and the working time of the workers.
The research object was the workers in the process of making holes on the tempeh plastic wraps. This research used ergonomic and anthropometric approaches to determine the dimensions of the workers’ bodies. The Nordic Body Map (NBM) and the Visual Analogue Scale were used to determine the musculoskeletal complaints of workers.
The results showed that the ergonomic design of the punching tool could reduce musculoskeletal complaints of pain sensation on the upper neck from the initial Visual Analog Scala (VAS) score of 65 into mild pain category with the scale score of 25. The initial back pain complaint with a moderate category with the scale score of 70 was reduced into mild pain category with the scale score of 16. The initial moderate pain on waist with the scale score of 70 was reduced into mild pain with the scale score of 18. The initial moderate pain on buttocks with the scale score of 70 was reduced into mild pain with the scale score of 26. The initial moderate pain on the lower part of the buttocks with a scale score of 69 was reduced into mild pain with a scale score of 29. The working time was reduced from 1.03 hours/unit into 0.52 hour/unit.
Keywords
Full Text:
PDFReferences
Abdurrahman I. R., Tahid A., Fathurachman. (2018). Foot Anthropometric Profile of High School Students in Bandung
Althea Medical Journal. 5(2): 93-97 doi: http://dx.doi.org/10.15850/amj.v5n2.1418
Adiyanto O. ,Effendi M.,Jaafar R.,Razak J. A., Faishal M.,Mulaicin M, and Mohamad N. A. (2022). “Integrated Self-Report and Observational Risk Assessment for Work-Related Musculoskeletal Disorder in Small and Medium Enterprises.” Engineering and AppliedScience Research. 49(1):73–80.
Anggraini, D. A., Bati, N. C. (2016). Analisa Postur Kerja Dengan Nordic Body Map dan REBA Pada Teknisi Painting Di Pt. Jakarta Teknologi Utama Motor Pekanbaru. Phonton: Jurnal Sain Dan Kesehatan, 7 (01), 87-79.
Anizar. 2015. Analisis Desain Tojok Sebagai Alat Sortasi Tbs Kelapa Sawit Di Loading Ramp. Jurnal Teknik Industri, Vol. X, No. 3, September. Hal. 149-154.
Ansari S, Nikpay A and Varmazyar S. 2018. Design and Development of an Ergonomic Chair for Students in Educational Settings. Health Scope. Vol. 7. Issue. 4. Pp 1-9. doi: 10.5812/jhealthscope.60531.
Anwardi, Saleh F. MH. dan Sahria. 2013. Re-Disain Alat Pembelah Buah Pinang Berbasis Ergonomi Makro Melalui Pendekatan ’Ship’ (Studi Kasus di Kecamatan Keritang – Inhil). Jurnal Teknik Industri, Universitas Bung Hatta, Vol. 2 No. 1, Juni, pp. 37-48.
Budiyanto T, 2019. Redesain Berbasis Ergonomi pada Stasiun Kerja Cetak Wajan Meningkatkan Kesehatan Dan Produktivitas Pekerja Pada Industri Cor Aluminium Di Kampung Nitikan Yogyakarta.( Disrtasi). Denpasar. Program Pasca Sarjana Universitas Udayana.Hal. 156.
Budiyanto T dan Setiyoso F.K. 2021. Designing An Ergonomic-Based Work Facility Of Dough Stirrer For Kerupuk Cipir Using Rapid Entire Body Assesment (Reba) Analysis To
Reduce Muskuloskeletal Complaints And Increase Productivity. Journal LOGIC. Vol. 29 Issue. 2 Pp. 87-92. p-ISSN : 1412-114X. e-ISSN : 2580-5649
Budiyanto T., Asih H. M., Adiyanto O., Kristanto I. (2021), Designing Of Work Facility For Ecobrick Material Using Ergonomic Intervention To Reduce Muscoloskeletal Disorder. Journal of Engineering Design and Technology (LOGIC). 21(3), 323-239.
Dawal S. Z, Zadry H. R, Azmi S.N, Rohim S.R, Sartika S.J. 2012. Anthropometric database for the learning environment of high school and university students. Int J Occup Saf Ergon. Vol. 18. No.4. Pp. 461–472. doi: 10.1080/10803548.2012.11076953.
Dianat, I., Nedaei, M.. and Nezami, M.A.M. 2015. The effects of tool handle shape on hand performance, usability and discomfort using masons' trowels. International Journal of
Industrial Ergonomics. 45 (2015) 13-20
Dul, J., Weerdmeester, B. 2008. Ergonomics for Beginners : A Quick reference Guide. Third Edition. Boca Raton: Taylor & Francis Group. p. 1 and 69–78.
Farid M, Adiyanto O., and Triesnaningrum H. F. (2020). “Analisa Biomekanika Pada Aktivitas
Penyetrikaan Studi Kasus Nafiri Laundry Yogyakarta.” Jurnal Ergonomi dan K3 5(1): 11–19.
Hawker G. A., Mian S, Kendzerska T., and French M. 2011. Measures of Adult Pain: Visual Analog Scale for Pain (VAS Pain), Numeric Rating Scale for Pain (NRS Pain),
McGill Pain Questionnaire (MPQ), Short-Form McGill Pain Questionnaire (SF-MPQ), Chronic Pain Grade Scale (CPGS), Short Form 36 Bodily Pain Scale (SF-36 BPS), and Measure of Intermittent and Constant Osteoarthritis Pain (ICOAP). Journal Arthritis Care & Research. Vol. 63, No. S11, pp S240–S252.
Jensen M. P., Chen C, Brugger A. M. 2003. Interpretation of visual analog scale ratings and change scores: a reanalysis of two clinical trials of postoperative pain. J Pain. 4:407–414.
Joshi, Mangesh, and Deshpande V.(2021) International Journal of Industrial Ergonomics Identification of Indifferent Posture Zones in RULA by Sensitivity Analysis. International Journal of Industrial Ergonomics 83(July):103-123.
Kroemer, K. H. E., & Grandjean, E. (2009). Fitting The Task To The Human, Fifth Editione A Textbook Of Occupational Ergonomics. London: CRC Press.
Luximon A, Luximon Y, Chao H. A (2013) Human Surface Prediction Model Based on Linear Anthropometry. Int J Adv Intell Sys. 6(3):213–22.
Shiru J.J, Abubakar S. Anthropometry. 2012. in engineering design (a case study of cassava grating machines installed in Doko and Kutigi metropolis of Lavun local government areas of Niger state). Niger Acad Forum. Vol. 22. No.1. Pp. 132–139.
Taifa I. W, Desai D. A. 2017. Anthropometric measurements for ergonomic design of students’ furniture in India. Eng SciTech Int Juornal. 2017;20. Vol 1. Pp. 232–329.
doi: 10.1016/j.jestch.2016.08.004
Tarwaka. 2015. Ergonomi Industri. Dasar-dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja. Edisi II dengan Revisi, Cetakan ke 2. Surakarta : Harapan Press.
Wardana, Marcelly Widya, Sulastri, and Siti Hasanah. 2019. “Penerapan Metode Failure Mode and Effect Analysis (FMEA) Dalam Mengidentifikasi Masalah Keruskaan Produk Pakan Ayam Pada PT. Japfa Comfeed Indonesia, TBK Unit Lampung.” Spektrum Industri 17(1):1–91.
Wibowoa R. K. K , Soni P (2014). Anthropometry and Agricultural Hand Tool Design for Javanese
and Madurese Farmers in East Java, Indonesia. APCBEE Procedia.. 8, 119 – 124
Article Metrics
Abstract view(s): 667 time(s)PDF: 492 time(s)
Refbacks
- There are currently no refbacks.
