Comparative Study of The Conventional Curing Machine with The Electric at Aluna Masaran Batik Manufacturer Industry

S. , Suharno(1*), J. , Joemintono(2), Aji Widi Kuncoro(3), Dewa Akbar Rasta Pradana(4), Muhammad Ghozali(5), Muhammad Ridwan(6), Muhammad Sholeh(7),

(1) Universitas Sebelas Maret
(2) Universiti Tun Hussein On Malaysia
(3) Universitas Sebelas Maret
(4) Universitas Sebelas Maret
(5) Universitas Sebelas Maret
(6) Universitas Sebelas Maret
(7) Universitas Sebelas Maret
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v22i1.21666

Abstract

The batik industry is constantly increasing its production. During production, a curing machine is used to dry the batik after the printing/screening process. The main problem with conventional machines is their inability to produce maximum heat. Currently, they are used in most industries and generate uneven heat, with LPG gas as the main fuel. Therefore, this study aims to develop an electric curing machine as an alternative to overcome the challenges of the conventional type It was carried out using a sample of the experimental test site selected through a purposive sampling method, namely the Aluna Batik industry in Masaran, Sragen. The data were collected by observing the outcomes of mechanical engineering and analyzed using descriptive methods. The results showed that conventional curing provides an advantage in the speed of heat supply, while electric curing stabilizes heat requirements. This showed that the electric machine is more profitable for large and fast quantities production, while the conventional is ideal for daily production.

Keywords

Batik Industry, Curing Machine, Machine Efficiency

Full Text:

PDF

References

Agung P.B. & Wahyu Dwi D.K., (2017). Efisiensi Proses Produksi Batik Melalui Penerapan Mesin Pengering Batik Dan Kompor Pemanas Lilin Batik Semi Otomatis. Otopro: Volume 13 No. 1, 30-34.

Anggraini, W & Putri, A.D. (2019). Penerapan Metode Bermain Peran (Role Playing) dalam Mengembangkan Kognitif Anak Usia 5-6 Tahun. Journal of early childhood education and development. Vol 1 No 2

Ardianto, T., Nurgiyatna, & Prasetyo, T. (2013). Aplikasi Pengenalan Batik Indonesia Berbasis Mobile Android. (Doctoral Dissertation, Universitas Muhammadiyah Surakarta).

Biegel. J.E. (1998). Pengendalian Produksi, Suatu Pendekatan Kuantitatif. Terjemahan. Tarsito Bandung.

Creswell. (2012). "Mixed Methods Research in Sports Marketing." International Journal of Multiple Research Approaches. Vol 09. September.

Debrina Puspita Andriani. (2019). Optimasi Parameter Ketahanan Luntur Batik Terhadap Keringat Dengan Desain Eksperimen Taguchi. DKB: Dinamika Kerajinan dan Batik. VOL. 36 NO. 1, JUNI 2019, HAL 81- 94.

Efriyanti, M., Garaika., Irviani, R. (2018). Analisis Implementasi Electronic Commerce Untuk Meningkatkan Omset Penjualan Butik Mery Berbasis Web Mobile. Jurnal Signaling STMIK Pringsewu. Vol 7 No 2 ISSN : 2085-2304

Hidayat, M. (2016). Model Komunikasi Kyai Dengan Santri Di Pesantren. Jurnal Komunikasi ASPIKOM. Vol 2 No 6. https://doi.org/10.24329/aspiko m.v2i6.89.

Hisayat, T & Hamijoyo, K. (2019). Alat Pewarna Batik Rol Ganda (Peder). Jurnal Litbang Sukowati. Vol 2 No 2. Hal 113-121

Lumintang, F.M. (2013). Analisis Pendapatan Petani Padi Di Desa Teep Kecamatan Langowan Timur. Jurnal EMBA. Vol 1 No 3 Hal 991-998. ISSN 2303-1174.

L. Mott, Robert. 2009. Elemen-Elemen Mesin dalam Perancangan Mekanis. Yogyakarta: ANDI.

Masiswo. Dkk., (2017). Karakteristik Fisik Produk Batik Dan Tiruan Batik. DKB: Dinamika Kerajinan dan Batik. Vol. 34, No. 2, Desember, 103-112.

Megawati, F. (2016).Kesulitan Mahasiswa Dalam Mencapai Pembelajaran Bahasa Inggris Secara Efektif. Jurnal Pedagogia. Vol 5 No 2. https://doi.org/10.1007/s00381- 016-3174-3.

Muhammad Faisal, et.al. 2020. Reducing Environmental Impact on SME Metals Production Process Using Life Cycle Assessment and Analytical Hierarchy Process Method. Jurnal Ilmiah Teknik Industri. 19(1). 84-94.

Nurainun, Heriyana, & Rasyimah. (2008). Analisis Industri Batik Di Indonesia. Jurnal Fokus Ekonomi. Vol 7 No 3. Hal 124-135. ISSN: 1412-3851

Pahlevi, Omar., Mulyani, A., & Khoir, M. (2018). Sistem Informasi Inventori Barang Menggunakan Metode Object Oriented Di PT. Livaza Teknologi Indonesia Jakarta. Jurnal Prosisko. Vol 5 No 1. e-ISSN: 2597-9922

Purnamasari, et al. (2016). Efektivitas Pengelolaan Badan Usaha Milik Desa (Bum Desa) Berbasis Ekonomi Kerakyatan Di Desa Warungbambu Kecamatan Karawang. Jurnal Politikom Indonesiana. Vol 1, No 2

Putra, S., Purwanto, & Kismartini. (2013). Perencanaan Pertanian Berkelanjutan Di Kecamatan Selo. Prosiding Seminar NAsional Pengelolaan Sumberdaya Alam Dan Lingkungan 2013, No. 1

Raihudaya, A. (2013). Pengukuran Efektivitas Mesin Curing Menggunakan Metode Overall Equipment Effectiveness (OEE) (Studi Kasus: PT. Pentasari Pranakarya). Thesis. Fakultas Teknologi Industri. Universitas Islam Sultan Agung

Sadli, M. (2019). Analisis Pengembangan Budaya Literasi Dalam Meningkatkan Minat Membaca Siswa Di Sekolah Dasar. Jurnal Pendidikan dan Pembelajaran Dasar. Vol 6 No 2. e-ISSN 2580-8915

Sodik, M., Sahal, Y.F.D., & Herlina, N.H. (2019). Pengaruh Kinerja Guru dalam Pelaksanaan Pembelajaran terhadap Prestasi Belajar Siswa pada Mata Pelajaran. Jurnal Penelitian Pendidikan Islam. Vol 7 No 1

Sudaryono. (2017). Metodologi Penelitian (Ed. 1.-Ce). Jakarta: Kharisma Putra Utama Offset.

Suharno, et.al. 2022. Calendering Machine Performance Analysis to Improve the Smoothness of Batik. Jurnal Ilmiah Teknik Industri. 21(2). 223-229.

Sukirno, A & Rohayanti. (2020). Konseling Kelompok Dalam Upaya Meningkatkan Semangat Belajar Mahasiswa Aktivis Pramuka. Jurnal al-Shifa. Vol 1 No 2

Sukmadinata, N. S. (2013). Metode Penelitian Pendidikan. Bandung: Rosda Karya

Suranto & M. Djunaidi. 2021. Marketing Development Model of Goyor Woven Fabric Increases Consumer Buying Interest in Pandemic Covid-19 Era: Study at Sragen Goyor Industry Center. Jurnal Ilmiah Teknik Industri. 20(1). 61-70.

Taufiqoh, B. R., Nurdevi, I., & Khotimah, K. (2018). Batik Sebagai Warisan Budaya Indonesia. Seminar Nasional Bahasa Dan Sastra, 58–65. http://research-report.umm.ac.id/index.php/SENASBASA/article/view/2220

Yani, A.S & Asya, A. (2019). Pengaruh Keakuratan Timbangan Dan Pengendalian Kualitas Terhadap Kelancaran Proses Produksi Pada Pt Smart Tbk. Jurnal Administrasi Dan Perkantoran Modern. Vol 8 No 3. ISSN: 2301 – 7813

Zainul Arifin. (2019). The Effect of RTV Silicone Rubber Mold Runner, Speed, and Direction of Spin Casting Machine on The Success and Quality of Pewter Craft Product. DKB: Dinamika Kerajinan dan Batik. Vol. 36 No. 2, December 2019, pp. 113-124.

Article Metrics

Abstract view(s): 331 time(s)
PDF: 107 time(s)

Refbacks

  • There are currently no refbacks.