Usulan Perancangan Alat Bantu Untuk Meminimalisir Kelelahan Fisik dan Mental Pekerja

Ferida Yuamita(1*), Retno Arum Sary(2),

(1) Universitas Teknologi Yogyakarta Teknik Industri Fakultas Sains dan Teknologi Jl. Glagahsari 63 Umbulharjo Yogyakarta
(2) Jurusan Teknik Industri, Universitas Teknologi Yogyakarta. Jl. Ringroad Utara, Jombor, Sleman, Yogyakarta, 55285
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v15i2.2424

Abstract

CV Poetra Mandiri Karton is a company that has not been able to meet production target each day.  Based on preliminary analysis, production underproduction was due to workers’ fatigue caused by manual material handling activities in the entire production process.  To solve these problems, nordic body map (NBM) approach was applied.  Prior to work, workers experienced musculoskeletal fatigue at down waist, and they experienced musculoskeletal fatigue at up waist, left forearm, right forearm, left hand, right hand, left ankle, and right ankle after work. Based on questionnaire of National Aeronautics and Space Administration Task Load Index (NASA-TLX), average of mental workload from all three groups is quite heavy.  By using rapid entire body assessment (REBA), it is found that average value of the risk in group 1 and group 2 requires immediate action, whereas action is required by the third group.  This article also presents a trolley design that will be used in manual material handling activities.

Keywords

manual material handling; nordic body map; NASA-TLX; REBA; trolley design

References

Akyeampong, J.; Udoka, S.; Caruso, G.; Bordegoni, M. 2014. “Evaluation of hydraulic excavator human-machine interface concepts using NASA-TLX”. International Journal of Industrial Ergonomics, Vol. 44, pp. 374 – 382.

Byrd,J.; Moore, L.T. 1986. Strategic Planning for Industrial Engineering Function. New York: Van Nostrand Reinhold Company.

Corlett, E.N. 1992. Evaluation of Human Work: A Practical Ergonomics Methodology. London: Taylor & Francis. Inc.

Hart, S.G.; Staveland, L.E. 1988. Development of NASA-TLX (Task Load Index): Results of Empirical and Theoritical Research, Human Mental Workload. North Holland: Elsevier Science Publishers B.V.

Higgnet,S.; McAtamney,L. 2000. “Rapid entire body assesment (REBA)”. Journal Applied Ergonomics, Vol.31 (2), pp. 201 – 205.

Kroemer, K.H.E.; Grandjean, E. 1997. Fitting the Task to TheMan: ATextbook of Occupational Ergonomis. 5th ed. Philadelphia: Taylor & Francis.

Mas’idah, E.; Fatmawati, W.; Ajibta, L. 2009.“Analisis manual material handling (MMH) dengan mengunakan metode biomekanika untuk mengidentifikasi resiko cedera tulang belakang (mosculosketelal disorder) (Studi Kasus pada Buruh Pengangkat Beras di Pasar Jebor Demak)”. Majalah Ilmiah Sultan Agung, Vol. 45(119), pp. 37-56.

Muslimah, E.; Pratiwi, I.; Rafsanjani, F. 2006. “Analisis Manual Material Handling Menggunakan NIOSH Equation”. Jurnal Ilmiah Teknik Industri, Vol.5 (2), pp. 53 – 60.

Savitri, A.; Mulyati, G.T.; Azis, I.W.F. 2012. “Evaluation of working postures at a garden maintenance service to reduce musculoskeletal disorder risk (A case study of PT. Dewijaya Agrigemilang Jakarta)”. Agroindustrial Journal, Vol. 1 (1), pp. 21 – 27.

Sugiharto, A.I.; Trihastuti, D.; Hartanti, L.P.S. 2013. “Analisis perbaikan postur dan metode kerja untuk mengurangi kelelahan muskuloskeletal di PT. XYZ Surabaya”. Jurnal Gema Aktualita, Vol.2(2), pp. 98 – 106.

Suhardi,B. 2008. Buku Perancangan Sistem Kerja dan Ergonomi. Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan

Tarwaka, T.; Bakri, S.H.A.; Sudiajeng, L. 2004. Ergonomi untuk Keselamatan Kerja dan Produktivitas. Surakarta: UNIBA Press

Wignjosoebroto, S. 2000. Ergonomi Studi Gerak dan Waktu: Teknik Analisis untuk Peningkatan Produktivitas Kerja. Surabaya: Guna Widya

Article Metrics

Abstract view(s): 1386 time(s)
PDF (Bahasa Indonesia): 2757 time(s)

Refbacks

  • There are currently no refbacks.