Penentuan Lokasi Fasilitas Postponement Pada Rantai Pasok Ordinary Portland Cement
(1) Institut Teknologi Telkom Purwokerto
(2) Universitas Diponegoro
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v17i2.5974
Abstract
This research deals with the problem of postponement facility siting for distributing OPC cements produced by PT. Semen Jawa. In order to obtain the optimum value of the site location, centre of gravity (CoG) method is applied. From calculation, a location in Jatiwarna, Bekasi with longitutede and latitude of -6.30687 dan 106.9311, respectively, is selected. I addition, for the reason of efficiency, it is suggested in this paper the PT. Semen Jawa should share a location of SCG batching plant in Kampung Rambutan as a postponement facility.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Abukhader, S.M.; Jonson, G. (2007). “Postponement strategy in food supply chains – an empirical investigation”. International Journal of Logistics Systems and Management, Vol. 3 (2), 215 – 234.
Akgun, I.; Gumusbuga, F.; Tansel, B. (2015). “Risk bsed facility location by using fault tree analysis in disaster management”. Omega, Vol. 52, 168 – 179.
Alghazalliq; Suryono. (2015). Hino FM260 JD Karoseri Bulk Carrier 30 Ton Hino FM 260 JD. Karoseri Wing Box. Link: https://hinofm260jd.wordpress.com/2012/11/05/hino-fm260-jd-karoseri-bulk-carrier-30-ton/#more-27. Accesed March 3, 2018
Babaei, A.; Shahanaghi, K. (2017). “A new model for planning the distributed facilities locations under emergency conditions and uncertainty space in relief logistics”. Uncertain Supply Chain Management, Vol. 5, 105 – 125.
Balcik, B.; Beamon, B.M.; Smilowitz, K. (2008). “Last mile distribution in humanitarian relief”. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, Vol. 12 (2), 51 – 63.
Bartolacci, M.R.; LeBlanc, L.J.; Kayikci, Y.; Grossman, T.A. (2012). “Optimization modeling for logistics: Options and implementations”. Journal of Business Logistics, Vol. 33 (2), 118 – 127.
Boone, C.A.; Craighead, C.W.; Hanna, J.B. (2007). “Postponement: an evolving supply chain concept”. Innternational Journal of Physical Distribution & Logistics Management, Vol. 37 (8), 594 – 611.
Bucklin, L.P. (1965). “Postponement, speculation and the structure of distribution channels”. Journal of Marketing Research, Vol. 2 (1), 26 – 31.
Carbonara, N.; Pellegrino, R. (2018). “Real options approach to evaluate postponement as supply chain disruptions mitigation strategy”. International Journal of Production Research, Vol. 56 (15), 5249 – 5271. DOI: 10.1080/00207543.2017.1403663.
Choi, K.; Narasimhan, R.; Kim, S.W. (2012). “Postponement strategy for international transfer of products in a global supply chain: A system dynamics examination”. Journal of Operations Management, Vol. 30, 167 – 179.
Davila, T.; Wouters, M. (2007). “An empirical test of inventory, service and cost benefits from a postponement strategy”. International Journal of Production Research, Vol. 45 (10), 2245 – 2267.
Dong, K. (2012). “Study on Distribution Center Location Model based on Economics and Timeliness”. Advances in Mechanical Engineering and Its Application, Vol. 3 (1), 263 – 267.
Erdemir, U. (2003). Optimizing Warehouse Logistics Operations Through Site Selection Models. Thesis, Naval Postgraduate School, California.
Faska. (2015). Ini 9 Titik Macet Jalur Sukabumi-Ciawi Paling Menyebalkan. Pojok Jabar. http://jabar.pojoksatu.id/sukabumi/2015/07/20/ini-9-titik-macet-jalur-sukabumi-ciawi-paling-menyebalkan/, Accesed on March 7 2018.
Ferreira, K.A.; Tomas, R.N.; Alcantara, R.L.C. (2015). “A theoretical framework for postponement concept in a supply chain”. International Journal of Logistics: Research and Application, Vol. 18 (1), 46 – 61.
Graman, G.A. (2010). “A partial-postponement decisión cost model”. European Journal of Operational Research, Vol. 201, 34 – 44.
Guericke, S.; Koberstein, A.; Schwartz, F.; Vos, S. (2012). “A stochastic model for the implementation of postponement strategies in global distribution networks”. Decision Support Systems, Vol. 53, 294 – 305.
Hale, T.S.; Moberg, C.R. (2003). “Location science research: a review”. Annals of Operations Research, Vol. 123, 21 - 35.
Hariawan, J.B. (2007). Pengaruh Perbedaan Karakteristik Type Semen Ordinary Portland Cement (OPC) dan Portland Composite Cement (PCC) Terhadap Kuat Tekan Mortar. Skripsi. Fakultas Teknik Sipil dan Perencanaan. Universitas Gunadarma.
Intana. (2013). SCG Bangun Pabrik Ramah Lingkungan Senilai Rp 3,4 Triliun. Majalah SWA. https://swa.co.id/swa/trends/management/scg-bangun-pabrik-ramah-lingkungan-senilai-rp-34-triliun. Acessed March 7, 2018.
Iulia, T. R.; Gabriela, B. M.; Constantin, D.V. (2011). “Spatial modeling in logistics decision-making processes: Identifying the optimal location for a single central warehouse”. Annals of Faculty of Economics, Vol. 1 (1), 137 – 143.
Jirsák, P.; Krsnakova, L. (2015). “Supply chain design–where to allocate logistics facility”. Perners Contacts, Vol. 10 (4), 41 – 54.
Khongkan, T.; Road, V.; Laptaned, U. (2014). “A location analysis of the distribution center and logistics hub in the Greater Mekong Subregion”, Rev. Integr. Bus. Econ. Res., Vol. 3, 136 – 146.
Klose, A.; Drexl, A. (2005). “Facility location models for distribution system design”. European Journal of Operational Research, Vol. 162, 4 – 29.
Kumar, A.; Singh, G. (2014). “Logistics optimization by using rectilinear distance”. International Journal of Innovative Science, Engineering & Technology, Vol. 1 (4), 463 – 468.
Leung, S.C.; Ng, W-L. (2007a). “A stochastic programming model for production planning of perishable products with postponement”. Production Planning & Control: The Management of Operations, Vol. 18 (3), 190 – 202.
Leung, S.C.; Ng, W-L. (2007b). “A goal programming model for production planning of perishable products with postponement”. Computers & Industrial Engineering, Vol. 53, 531 – 541.
Liu, S.; Wang, Z.; Miao, R.; Xu, J.; Huang, H. (2013). “Research of location selection of distribution center for service base don gravity method”. Applied Mechanics and Materials, Vol. 433-435, pp. 2419 – 2423.
Liu, X.; Guo, X.; Zhao, X. (2012). “Study on logistics center site selection of Jilin Province”. Journal of Software, Vol. 7 (8), 1799 – 1806. doi: 10.4304/jsw.7.8.1799-1806.
Lu, C.-C.L.; Ying, K.-C.; Chen, H.-J. (2016). “Real-time relief distribution in the aftermath of disasters – A Rolling horizon approach”. Transportation Research Part E, Vol. 93, 1 – 20.
Melo, M.T.; Nickel, S.; Saldanha-da-Gama, F. (2009). “Facility location and supply chain management – A review”. European Journal of Operational Research, Vol. 196, 401 – 412.
Mirčetić, D.; Nikoličić, S.; Maslarić, M. (2014). “Logistic centers: Literature review and papers classification”. The Fifth International Conference Transport and Logistics.
Nahleh, Y. A.; Kumar, A.; Daver, F. (2013). “Facility location problem in emergency logistic”. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 7 (10), 2113 – 2118.
Onnela, N. (2015). Determining the Optimal Distribution Center Location. Thesis, the Faculty of Business and Built Environment, Tampere University of Technology. Diakses dari https://dspace.cc.tut.fi/dpub/bitstream/handle/123456789/22938/onnela.pdf?sequence=1&isAllowed=y pada 21 Desember 2018.
Owen, S.H.; Daskin, M.S. (1998). “Strategic facility location: A review”. European Journal of Operational Research, Vol. 111, 423 – 447.
Qin, Y. (2011). “On capacity allocation model of partial postponement strategy”. Procedia Engineering, Vol. 15, 4342 – 4346.
Sarrazin, F.; LeBel, L.; Lehoux, N. (2018). “Identifying key factors for the success of a regional logistic center”. Forest Science, Vol. 64 (3), 233 – 245.
Selimi, A.; Svensson, T. (2013). Localization of a Distribution Center for Locally Produced Fruit and Vegetables A case study of Svenska Odlarlaget and Samodlarna’ Degree Project, Linnaeus University, Swedia.
Seth, D.; Paniraghi, A. (2015). “Application and evaluation of packaging postponement strategy to boost supply chain responsiveness: a case study”. Production Planning & Control, Vol. 26 (13), 1069 – 1089.
Slabinac, M. (2013). “Approaches to distribution centre's location problem and its role in green supply chain management”. Business Logistics in Modern Management, Vol. 13, 95 – 102.
Szmelter, A. (2016). “Postponement in logistics strategies of global supply chains”.Torun Business Review, Vol. 14 (1), 151 – 161.
Van Hoek, R.I. (1999). “Postponement and the reconfiguration challenge for food supply chains”. Supply Chain Management, Vol. 4 (1), 18 – 34.
Van Hoek, R.I. (2001). “The rediscovery of postponement a literature review and directions for research”. Journal of Operations Management, Vol. 19, 161 – 184.
Van Hoek, R.I.; Peelen, E.; Commandeur, H.R. (1999). “Achieving mass customization through postponement: a study of international changes”. Journal of Market Focused Management, Vol. 3, 353 – 368.
Wang, L.; Liu, Y. (2017). “Research on location based on gravity method of Changsha City Greenery Fruit Supermarket Chain Distribution Center”. 2017 International Conference on Economics and Management Engineering (ICEME 2017). Diakses dari http://www.dpi-proceedings.com/index.php/dtem/article/view/11767/11308 pada 21 Desember 2018.
Wang, X.; Xie, Z.; Guan, X. (2012). “Partial postponement strategy: application in automobile manufacturers”. Advanced Materials Research, Vol. 443-444, 296 – 301.
Wilson, D. (2005). “Location modeling in logistics: A decision maker defined approach”. MODSIM05 International Congress on Modelling and Simulation Advances and Applications for Management and Decision Making Proceedings, pp. 1794 – 1798.
Wong, H.; Potter, A.; Naim, M. (2011). “Evaluation of postponement in the soluble coffee supply chain: A case study”. International Journal of Production Economics, Vol. 131, 355 – 364.
Yeh, C.; Yang, H.-C. (2003). “A cost model for determining dyeing postponement in garment supply chain”. Int J Adv Manuf Technol, Vol. 22, 134 – 140.
Yeung, J.H.Y.; Selen, W.; Deming, Z.; Min, Z. (2007). “Postponement strategy from a supply chain perspective: cases from China”. International Journal of Physical Distribution & Logistics Management, Vol. 37 (4), 331 – 356.
Zhang, C.; Tan, G.-W. (2001). “Classification of postponement strategies and performance metrics framework”. PACIS 2001 Proceedings. Diakses dari: https://aisel.aisnet.org/pacis2001/4 pada 6 Maret 2018.
Article Metrics
Abstract view(s): 1123 time(s)PDF (Bahasa Indonesia): 900 time(s)
