KAJIAN POSTUR KERJA PADA PENGRAJIN TENUN SONGKET PANDAI SIKEK

Dessi Mufti(1*), Eva Suryani(2), Novia Sari(3),

(1) Jurusan Teknik Industri, Fakultas Teknologi Industri, Universitas Bung Hatta, Jl. Gajah Mada No19 Olo Nanggalo Padang. 25143
(2) Jurusan Teknik Industri, Fakultas Teknologi Industri, Universitas Bung Hatta, Jl. Gajah Mada No19 Olo Nanggalo Padang. 25143
(3) Jurusan Teknik Industri, Fakultas Teknologi Industri, Universitas Bung Hatta, Jl. Gajah Mada No19 Olo Nanggalo Padang. 25143
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v12i1.661

Abstract

Working position of Songket workers at Tenunan Antik Pusako Minang Pandai Sikek were not ergonomic. There were indicated by the presence of curvature, incompatibility machine dimension with operator anthropometric (artisans songket) so that appear complaints on a worker’s limb. It required the assessment and review of work postures using the Rapid Upper Limb Assessment (RULA). The results is that final score of each work posture and level of risk. There are 6 working posture is often performed by workers. Working posture has final score 7 and higher risk level is sitting hunched forward with his arms and legs on tiptoe, and sat with his arms held forward positions.

Keywords

ergonomics; RULA; songket; working posture

References

Leuder, R. 1996. A Proposed RULA for Computer User. “Proceedings of the Ergonomis Summer Workshop, UC Berkeley Center For Occupational & Environmental Health Continuing Program”. San Francisco.

Nurmianto, E. 1998. Ergonomi Konsep Dasar dan Aplikasinya, Edisi Pertama. ITS, Surabaya.

Sutalaksana, I.Z. 1982. Teknik Tata Cara Kerja. Bandung, Penerbit ITB.

Wignosoebroto, S. 1995. Ergonomi, Studi Gerak dan Waktu, Edisi Pertama. Penerbit PT. Guna Widya Surabaya.

Article Metrics

Abstract view(s): 1448 time(s)
PDF (Bahasa Indonesia): 3260 time(s)

Refbacks

  • There are currently no refbacks.