Analysis of Work Posture Using the Muscle Fatigue Assessment (MFA) and Novel Ergonomic Postural Assessment (NERPA)
(1) University of Muhammadiyah Malang
(2) University of Muhammadiyah Malang
(3) University of Muhammadiyah Malang
(4) University of Muhammadiyah Malang
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v20i1.13222
Abstract
A company needs to know each employee's ability to reduce accidents that happen to workers due to a lack of study on ergonomic principles. The research was conducted at a construction company producing paving blocks in Kediri. The paving production capacity at the company is 1000 paving/day. In 2017, three work accidents were caused by the fast pace of workers reaching the tired phase while working. Pulling, lifting, and putting down in carrying weighty loads and the repetition frequency of intense activities trigger stress on body parts that affect the worker's performance. The purpose of this study is to assess and provide recommendations for improvements in work activities that have a hazardous risk value based on the MFA and NERPA assessment methods. The research on the MFA method shows that activities with dangerous risk (high/very high) were in transportation activities. For the NERPA method, activities with dangerous risks were in 3 activities at the finishing work station with a final score of 7. Recommendations for improvement are work posture improvement, physical environment improvement, and work facilities.
Keywords
Full Text:
PDFReferences
Al-Otaibi, S.T. (2001). "Repetitive strain injury." Saudi Medical Journal, 22 (5), 398 - 402.
Arsalani, N., Fallahi-Khoshknab, M., Josephson, M., Lagerström, M. (2014). "Musculoskeletal disorders and working conditions among Iranian nursing personnel." International Journal of Occupational Safety and Ergonomics, 20 (4), 671 - 680.
Bagas, Ertansyah, A.A. (2015). "Analisa Postur Kerja Dengan Metode RULA Pada Pekerja CV. Cipta Usaha Mandiri". Industrial Engineering Dept., Engineering Faculty, Universitas Diponegoro, 12.
Bloom, J. S., Ehrenreich, I. M., Loo, W. T., Lite, T.-L. V., & Kruglyak, L. (2013). Finding The Sources Of Missing Heritability In A Yeast Cross. Nature, 494(7436), 234. (2013). International Ergonomics Association. Ergonomic.
Correia, D.F. (2016). "Analisis Postur Kerja Menggunakan Metode Rapid Upper Limb Assessment (RULA) dan Ovako Working Posture Analysis System (OWAS)". Jurnal Teknik Industri, 4 (2).
Dimi, C., Syamsiar, S., Andi, W. (2014). "Hubungan Intensitas Getaran Dengan Keluhan Muskuloskeletal Disorders (MSDs) Pada Tenaga Kerja Unit Produksi Paving Block CV. Sumber Galian Makassar". Jurnal MKMI, 10 (4), 1 – 13.
Fass, S., Yousef, R., Liginlal, D., Vyas, P. (2017). Understanding causes of fall and struck-by incidents: What differentiates construction safety in the Arabian Gulf region? Applied Ergonomics, 58, 515-526.
Febriyanti, D. (2008). Kajian Risiko Cummulative..., Dieta Febriyanti, FKM UI, 2008 Universitas Indonesia. Universitas Stuttgart.
Habibi, E., Haghshenas, B., Zare, M., Khakkar, S. (2017). Risk of musculoskeletal disorders in a manufacturing company using NERPA and QEC methods. Journal of Preventive Medicine, 3 (4), 75-67.
Hartono, B. (2005). Profil Kesehatan Indonesia 2005. Profil Kesehatan Indonesia 2005, 283.
Heidarimoghadam, R., Mohammadfam, I., Babamiri, M., Soltanian, A.R., Khotanlou, H., Sohrabi, M.S. (2020). "Study protocol and baseline results for a quasi-randomized control trial: An investigation on the effects of ergonomic interventions on work-related musculoskeletal disorders, quality of work-life and productivity in knowledge-based companies." International Journal of Industrial Ergonomics, 80, 103030. doi: https://doi.org/10.1016/j.ergon.2020.103030
Hoe, V.C., Urquhart, D.M., Kelsall, H.L., Sim, M.R. (2012). "Ergonomic design and training for preventing work‐related musculoskeletal disorders of the upper limb and neck in adults." Cochrane Database of Systematic Reviews (8).
Irvan, M., Ilmi, A.M., Choliliyah, I., Nada, R.F., Isnaini, S. L., Khorinah, S.A. (2020). Pembuatan Batik Shibori Untuk Meningkatkan Kreativitas Masyarakat Pada Masa Pandemi Batik Ditetapkan Sebagai Indonesia Cultural Heritage oleh United Nations Educational, Scientific And Cultural Organisation (UNESCO).
Jayanti, M., Setyaningsih, S., Mutiah, A. (2013). "Analisis Tingkat Risiko Musculoske letal Disorders (MSDs) Dengan The Brieftm Survey dan Karakteristik Individu Terhadap Keluhan MSDs Pembuat Wajan Di Desa Cepogo Boyolali". Jurnal Kesehatan Masyarakat Universitas Diponegoro, 2 (2).
Kalte, H.O. (2016). "Evaluation of Work Fatigue in Loading Workers Using Muscle Fatigue Assessment Method (MFA): A Case Study in a Brick Factory." Journal of Health Research in Community, 2 (2), 29-36.
Ma, L., Chablat, D., Bennis, F., Zhang, W., & Guillaume, F. (2010). A new muscle fatigue and recovery model and its ergonomics application in human simulation. Virtual and Physical Prototyping, 5(3), 123-137.
Moradpour, Z., Rezaei, M., Torabi, Z., Khosravi, F., Ebrahimi, M., & Hesam, G. (2019). Study of Correlation Between Muscle Fatigue Assessment and Cornell Musculoskeletal Disorders Questionnaire in Shahroud Taxi Drivers in 2017: A Descriptive Study. Journal of Rafsanjan University of Medical Sciences, 17(11), 1031-1042.
Motamedzade, M., Saedpanah, K., Salimi, K., & Eskandari, T. (2016). Risk assessment of musculoskeletal disorders by Muscle Fatigue Assessment method and implementation of an ergonomic intervention in Assembly industry. Journal of Occupational Hygiene Engineering, 3(1), 33-40.
Nugroho, J., (2020). Perancangan Alat Perakitan Pallet Ergonomis Menggunakan Metode Verein Deutcher Ingenieure (VDI) 2222. Tugas Akhir. UIN Sultan Syarif Kasim, Riau.
Parno, A., Sayehmiri, K., Parno, M., Khandan, M., Poursadeghiyan, M., Maghsoudipour, M., & Ebrahimi, M. H. (2017). The prevalence of occupational musculoskeletal disorders in Iran: A meta-analysis study. Work, 58(2), 203-214.
Pramestari, D. (2017). "Analisis Postur Tubuh Pekerja Menggunakan Metode Ovako Work Posture Analysis System (OWAS)". IKRAITH-TEKNOLOGI: Jurnal Sains & Teknologi. 1(2), 22–29.
Punnett, L., Wegman, D.H. (2004). "Work-related musculoskeletal disorders: the epidemiologic evidence and the debate." Journal of Electromyography and Kinesiology, 14 (1), 13 – 23. https://doi.org/10.1016/j.jelekin.2003.09.015
Purwaningsih, R., P., D.A., Susanto, N. (2017). Desain Stasiun Kerja Dan Postur Kerja Dengan Menggunakan Analisis Biomekanik Untuk Mengurangi Beban Statis Dan Keluhan Pada Otot. JTI Undip : Jurnal Teknik Industri, 12 (1), 15 - 22. https://doi.org/10.14710/jati.12.1.15-22
Ramadhan, K. (2017). Penilaian Risiko Ergonomi Dengan Metode Ergonomic Risk Assessment Pada Mekanik Tyre Di PT. Kalimantan Prima Persada Site Rantau Kalimantan Selatan. Tugas Akhir. Program Studi D.Iii Hiperkes Dan Keselamatan Kerja Fakultas Kedokteran Universitas Sebelas Maret.
Riskha, R. N. (2017). Gambaran Tingkat Risiko Aktivitas Penanganan Beban Manual Pada Pekerja Pembuatan 3 Jenis Sediaan Obat Di PT X Tahun 2016 (Studi Kasus Menggunakan Metode KIM MHO) (Vol. 2016).
Saberipour, B., Ghanbari, S., Zarea, K., Gheibizadeh, M., & Zahedian, M. (2019). Investigating the prevalence of musculoskeletal disorders among Iranian nurses: a systematic review and meta-analysis. Clinical Epidemiology and Global Health, 7(3), 513 - 518.
Sanchez-Lite, A., Garcia, M., Domingo, R., & Angel Sebastian, M. (2013). Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer-Aided Engineering For Ergonomic Workplace Design. PLoS ONE, 8(8), 1–12.
https://doi.org/10.1371/journal.pone.0072703
Setiyowati, R., Pratiwi, I. (2017). Analisis Postur Kerja dengan Menggunakan Metode Workplace Ergonomic Risk Assessment (WERA) dan Novel Ergonomic Postural Assessment (NERPA) Pada Pekerja Batik (Studi Kasus: UKM Batik Oguud Kampoeng Batik Laweyan). Universitas Muhammadiyah Surakarta.
Sharan, D., Jose, J. A., & Rajkumar, J. S. (2018). How to Perform an Ergonomic Workplace Analysis? Paper presented at the Congress of the International Ergonomics Association.
Siska, M., & Teza, M. (2012). Analisa posisi kerja pada proses pencetakan batu bata menggunakan metode NIOSH. Jurnal Ilmiah Teknik Industri, 11(1), 61-70.
Susihono, P. W. (2012). Perbaikan Postur Kerja Untuk Mengurangi Keluhan Muskuloskeletal Dengan Pendekatan Metode Owas (Studi kasus di UD. Rizki Ragil Jaya – Kota Cilegon). Spektrum Industri: Jurnal Ilmiah Pengetahuan Dan Penerapan Teknik Industri, 10 (1), 69 – 81.
Valero, E., Sivanathan, A., Bosché, F., & Abdel-Wahab, M. (2016). Musculoskeletal disorders in construction: A review and a novel system for activity tracking with body area network. Applied Ergonomics, 54, 120-130.
W.H.O (2013). Global action plan for preventing and controlling non-communicable diseases 2013-2020: World Health Organization.
Yazdanirad, S., Khoshakhlagh, A. H., Habibi, E., Zare, A., Zeinodini, M., & Dehghani, F. (2018). Comparing the effectiveness of three ergonomic risk assessment methods—RULA, LUBA, and NERPA—to predict the upper extremity musculoskeletal disorders. Indian journal of occupational and environmental medicine, 22(1), 17.
Article Metrics
Abstract view(s): 1555 time(s)PDF: 1559 time(s)
Refbacks
- There are currently no refbacks.