Pengukuran Efektivitas Mesin Menggunakan Overall Equipment Effectiveness Untuk Dasar Usulan Perbaikan
(1) 
(2) Program Studi Teknik Industri, Fakultas Sains dan Teknologi, Universitas Ma Chung, Jl. Villa Puncak Tidar N-01 Malang
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v15i2.2141
Abstract
CV. Gracia has offset printing machines that often have downtime due to engine failures. The low effectiveness of the offset printing machines could cause losses to the company. Overall Equipment Effectiveness (OEE) method is a tool to determine the success rate of Total Productive Maintenance (TPM) based on categories of availability, performance, and quality. The OEE average value of the company in 2014, 57%, is relatively low. In this study, causes of this low OEE is analyzed using Failure Mode and Effect Analysis (FMEA) and fishbone diagram. Improvements such as relocation of raw material and colourful catalog were subsequently proposed and implemented during April - May 2016. The implementation resulted in OEE average value of 60%.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Carlson, C.S. 2012. Effective FMEAs: Achieving Safe, Reliable, and Economical Products and Processes Using Failure Mode and Effects Analysis. Hoboken: John Wiley& Sons, Inc.
Gano, D. L. 2011. Seven Steps to Effective Problem-Solving and Strategies for Personal Success. Washington, USA: LLC Richland.
Montgomery, D. C. 2009. Introduction to Statistical Quality Control. Hoboken: John Wiley & Sons, Inc.
Nakajima, S. 1988. Introduction to Total Productive Maintenance. Portland: Productivity Press Inc.
Rahmad, R,;Pratikto, P.; Wahyudi, S. 2012. “Penerapan overall equipment effectiveness (OEE) dalam implementasi total productive maintenance (TPM)”. Jurnal Rekayasa Mesin, Vol. 3 (3), pp. 431-437.
Rinawati, D.I.; Dewi, N.C. 2014. “Analisis penerapan total productive maintenance (TPM) menggunakan overall equipment effectiveness (OEE) dan six big losses pada mesin Cavitec di PT. Essentra Surabaya.” Prosiding SNATIF Ke-1 Tahun 2014, Kudus: Universitas Muria.
Said, A.; Susetyo, J.2008. “Analisis total producive maintenance pada lini produksi mesin perkakas guna memperbaiki kinerja perusahaan”. Prosiding Seminar Nasional Aplikasi Sains dan Teknologi. Yogyakarta: IST Akprind.
Article Metrics
Abstract view(s): 2600 time(s)PDF (Bahasa Indonesia): 4400 time(s)
Refbacks
- There are currently no refbacks.