Desain Perancangan Alat Penyaring Dalam Proses Pembuatan Tahu Dengan Metode Macro Ergonomic Analysis and Design (MEAD)
(1) Universitas Islam Indonesia
(2) Universitas Islam Indonesia
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v16i1.3845
Abstract
Gunung Kidul Regency is a region of soybean producer in Daerah Istimewa Yogyakarta. The raw materials support the tofu-making industry where one of the centers of tofu industry in Siraman and Sumbermulyo Wonosari. The productivity of the tofu manufacturing process is determined on the work tool and worker performance. To increase productivity a holistic approach is necessary considering all aspects. In this research, the method used to design holistically is macro ergonomic analysis and design (MEAD). With a sociotechnical MEAD approach, it is identified control variance to avoid musculoskeletal complaints that have an impact on increased productivity. This research only makes the design with high tool filter is 1014,70 mm and width 419,9 mm. A blower tool that facilitates removal of soy water material with suction specification and press 30 m / s using 220 VA power supply and 1300 VA power with galvanized pipe as conductor of 2 inch diameter.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Azadeh, A.; Shabanpour, N.; Gharibdousti, M.S.; Nasirian, B. (2016). “Optimization of supply chain base on macro ergonomics criteria: A case study in gas transmission unit”. Journal of Loss Prevention in Process Industries, Vol. 43, pp.: 332 – 351.
Asadzadeh, S.M.; Azadeh, A.; Negahban, A.; Soutoudeh, A. (2013). “Asessment and improvement of interegrated HSE and macro ergonomics factors by fuzzy cognitive maps: The case of large refinery”. Journal of Loss Prevention In The Process Industries, Vol. 26, pp.: 1015 – 1026.
Amell, T.; Kumar, S. (2001). “Work related musculoskeletal disorder: Design and prevention strategy. A review”. Journal of Occupational Rehabilitation, Vol. 11 (4), pp.: 255 – 265.
Aprianto, T.; Purnomo, H. (2011). “Desain pencetak dan pengepres tahu pada UKM tahu menggunakan metode macroergonomics analysis and design (MEAD)” Prosiding Seminar Nasional IENACO 2011, UMS.
Battini, D.; Faccio, M.; Persona, G.; Sgarbossa, F. (2011). “New methodological framework to improve productivity and ergonomics in assembly system design”. International Journal of Industrial Ergonomics, Vol. 41, pp.: 30 – 42.
Cohen, L. (1995). Quality Function Deployment, How To Make QFD Work For You. New York: Addison-Wesley Publishing Company.
Destiana, I.; Suhardi, B.; Dwi, R. (2010). Perancangan Alat Penyaringan Tahu Berdasarkan Prinsip Ergonomi. Skripsi, Universitas Sebelas Maret, Solo.
Guimares L.B.; Ribeiro, J.L.D.; Renner, J.S.; De Oliveira, P.A.B. (2013). “Worker evaluation of macroergonomics intervention in a Brazilian footwear company”. Journal of Applied Ergonomics, Vol. 45, pp.: 923 – 935.
Holden, R.J.; Brown, R.L.; Scanlon, M.C.; Rivera, A.J.; Karsh, B.T. (2015). “Micro and macro ergonomics changes in mental workload and medication safety following the implementation of new health IT”. International Journal of Industrial Ergonomics, Vol. 49, pp.: 131 – 143.
Hendrick, H.W. (2005). Macroergonomic Methods. in Stanton, N.; Hedge, A.; Brookhuis, K.; Sales, E.; Hendrick, H.W. Handbook of Human Factors and Ergonomics Methods. pp.: 75-1 – 75-4. NewYork: CRC Press.
Mulyana, J.I.G.; Santosa, H.L.M.; Prasetya, W. (2013). “Perancangan alat penyaringan dalam proses pembuatan tahu”. Jurnal Ilmiah Teknik Industri, Vol. 12 (1), pp.: 21 – 30.
Malmberg-Ceder, K.; Haanpaa, M.; Korhonen, P.E.; Kautiainen, H.; Soinila, S. (2016). “Relationship of musculoskeletal pain and well being at work, does pain matter”. Scandinavian Journal of Pain, Vol. 15, pp.: 30 – 43.
Realyvasquez, A.; Maldonado-Malcias, A.A.; Garcia-Alcaraz, J.L.; Blanco-Fernandez, J. (2015a). “Effects of organizational macroergonomics compatibility element over manufacturing system performance”. 6th International Conference on Applied Human Factor Ergonomics (AHFE 2105) and the Affiliated Conference, Vol. 3, pp.: 5715 – 5722.
Realyvasquez, A.; Maldonado-Malcias, A.A.; Garcia-Alcaraz, J.; Cortes-Robles, G.; Blanco-Fernandez, J. (2015b). “Structural model of the effect of environmental elements on the psycological characteristics and performance of the employee of manufacturing system”. International Journal of Environmental Research and Public Health, Vol. 13, pp.: 104 – 117.
Subiyantoro, E. (2007). Usulan Calon Penerima Krenova Masyarakat 2007. BPPD (Badan Perencanaan dan Pembangunan Daerah) Kabupaten Gunung Kidul, Yogyakarta.
Sutarmi, S. (2013). Produksi Kedelai Gunung Kidul 21.000 Ton, online pada http://jogja.antaranews.com/berita , diakses tanggal 15 Desember 2016.
Sudaryanto, S.; Hanim, A. (2002). “Evaluasi kesiapan UKM menyongsong pasar bebas ASEAN (AFTA): Analisis perspektif dan tinjauan teoritis”. Jurnal Ekonomi Akuntansi Manajemen, Vol. 1 (2).
Suzianti, A.; Humaira, S.; Anjani, S. (2013). “Macroergonomis approach for improving the municipal waste management system in Jakarta”. International Journal of Innovation Management and Technology, Vol. 4 (6), pp.: 560 – 564.
Article Metrics
Abstract view(s): 4160 time(s)PDF (Bahasa Indonesia): 7170 time(s)
Refbacks
- There are currently no refbacks.