ANALISIS KINERJA PROSES LATEX DIPPING MENGGUNAKAN TEKNIK CAPABILITY PROCESS (STUDI KASUS: PT DHARMA MEDIPRO)

Yona Maimury(1*), Hendy Tannady(2),

(1) prodi teknik industri, universitas bunda mulia
(2) Program Studi Teknik Industri, Fakultas Teknologi dan Desain, Universitas Bunda Mulia, Jln. Lodan Raya No. 2-Ancol-Jakarta Utara 14350
(*) Corresponding Author
DOI: https://doi.org/10.23917/jiti.v14i2.653

Abstract

The quality of product is reflected from the performance of its process. The most frequent issue that occurs in local company today -- is -- most company only focuses on the output regardless the process. It causes the difficulty that occurs in local company to compete with other company in global environment. One of the local companies that has their business shifting up significantly, with the great number of export target and actual export, is PT Dharma Medipro, which has many processes on the production of sphygmomanometer. One of the processes that critical to quality is latex dipping process, where the yield of this process that must be considered is the thickness of the bag component. In order to improve the process, we should first establish the measurement of process performance using capability process technique, which is one of the tools came from statistical process control method. The result indicates that the process is unstable with the value of capability indices Cp = 4,69 ; Cpk = -0,77 ; Cpu = -0,77 ; Cpl = 10,15 ; and Cpm = 0,28, moreover the number of part per million (PPM) that out of the spesification limit reach 912.500 units.

Keywords

statistical process control, sphygmomanometer, capability process indices, thickness

References

Sagbas, A. 2009. “Improving the process capability of a turning operation by the application of statistical techniques”, Materials and Technology, Vol. 43 (1), pp. 54-59.

Sharma, G.V.S.S.; Rao, P.S. 2013. “Process capability improvement of an engine connecting rod machining process”, Journal of Industrial Engineering International, Vol. 9 (1), pp. 1-9.

Montgomery, D.C. 2013. Statistical Quality Control: A Modern Introduction, Seventh Edition. Singapore: John Wiley & Sons.

Singh, R. 2011. “Process capability study of polyjet printing for plastic components”, Journal of Mechanical Science Technology, Vol. 25 (4), pp. 1011–1015.

Kane, V.E. 1986. “Process Capability Indices”, Journal of Quality Technology, Vol. 18 (1), pp. 41-52.

Pearn, W.L.; Chen, K.S. 1988. “ New generalization of the process capability index Cpk”, Journal of Applied Statistic, Vol. 25 (6), pp. 801-810.

Article Metrics

Abstract view(s): 881 time(s)
PDF (Bahasa Indonesia): 2048 time(s)

Refbacks

  • There are currently no refbacks.