THE EFFECT OF HEAT TREATMENT AND PRESSING AT 400 °C WITH COCONUT SHELL CHARCOAL MEDIA ON THE HARDNESS, MICROSTRUCTURE, AND DENSITY OF AL-SI ALLOYS

Masyrukan Masyrukan(1*), Agung Setyo Darmawan(2), Agus Hariyanto(3), Pramuko Ilmu Purboputro(4), Hanif Alfian Ihwanudin(5), Muhammad Ibnu Pamungkas(6)

(1) Engineering Faculty, Mechanical Engineering Department, Universitas Muhammadiyah Surakarta
(2) Engineering Faculty, Mechanical Engineering Department, Universitas Muhammadiyah Surakarta
(3) Engineering Faculty, Mechanical Engineering Department, Universitas Muhammadiyah Surakarta
(4) Engineering Faculty, Mechanical Engineering Department, Universitas Muhammadiyah Surakarta
(5) Engineering Faculty, Mechanical Engineering Department, Universitas Muhammadiyah Surakarta
(6) Engineering Faculty, Mechanical Engineering Department, Universitas Muhammadiyah Surakarta
(*) Corresponding Author

Abstract

This study aims to determine the effect of the heat treatment process and pressing on hardness, density, and morphological changes in the microstructure of Al-Si alloys. In this study, the medium used was coconut shell charcoal with a mesh size of 80 at a heat treatment process of 400 °C and a holding time of 75 minutes. The pressing was carried out with a load of 150 N. The result of this research is an increase in the hardness of the Al-Si alloy with an average value of 133 VHN after the Heat Treatment and pressing process. In the microstructure, there is a morphological change in the Al-Si alloy with the reduction of Si elements and also an increase in the density value after the heat treatment process.

Keywords

aluminum; charcoal; coconut shell; hardness; heat treatment

Full Text:

PDF

References

Qin, D., and C. Chen, 2022. “Research on the mechanical property and failure mechanism of the dieless clinched joints of various aluminum alloys”, Engineering Failure Analysis 137, 106384. https://doi.org/10.1016/j.engfailanal.2022.106384

Li, B., Y. Du, Z. S. Zheng, X. C. Ye, D. Fang, X. D. Si, and Y. Q. Wang, 2022. “Manipulation of mechanical properties of 7xxx aluminum alloy via a hybrid approach of machine learning and key experiments”, Journal of Materials Research and Technology 19, 2483-2496. https://doi.org/10.1016/j.jmrt.2022.06.015

Lei, G., B. Wang, J. Lu, C. Wang, Y. Li, and F. Luo, 2022. “Effects of solid solution temperature on the microstructure and properties of 6013 aluminum alloy”, Materials Chemistry and Physics 280, 125829. https://doi.org/10.1016/j.matchemphys.2022.125829

Zhang, H., D. Yang, X. Chen, H. Nagaumi, Z. Wu, C. Guo, J. Zou, P. Wang, K. Qin, and J. Cui, 2022. “Influence of Ag on microstructure, mechanical properties and tribological properties of as-cast Al-33Zn-2Cu high-zinc aluminum alloy”, Journal of Alloys and Compounds 922, 166157. https://doi.org/10.1016/j.jallcom.2022.166157

Darmawan, A. S., W. A. Siswanto, P. I. Purboputro, A. D Anggono, Masyrukan, and A. Hamid, 2019. “Effect of increasing salinity to corrosion resistance of 5052 aluminum alloy in artificial seawater”, Materials Science Forum 961, 107-111. https://doi.org/10.4028/www.scientific.net/MSF.961.107

Darmawan, A. S., T. W. B. Riyadi, A. Hamid, B. W. Febriantoko, and B. S. Putra, 2018. “Corrosion resistance improvement of aluminum under anodizing process”. AIP Conference Proceedings 1977, 20006. https://doi.org/10.1063/1.5042862

Rymer, L. M., L. Winter, K. Hockauf, and T. Lampke, 2021. “Artificial aging time influencing the crack propagation behavior of the aluminum alloy 6060 processed by equal channel angular pressing”, Materials Science and Engineering: A 811, 141039. https://doi.org/10.1016/j.msea.2021.141039

Yang, Z., and J. Banhart, 2021. “Natural and artificial ageing in aluminium alloys – the role of excess vacancies”, Acta Materialia 215, 117014. https://doi.org/10.1016/j.actamat.2021.117014

Shi, L., X. Cui, J. Li, G. Jin, J. Liu, and H. Tian, 2022. “Improving the wear resistance of heavy-duty gear steels by cyclic carburizing”, Tribology International 171, 107576. https://doi.org/10.1016/j.triboint.2022.107576

Mandal, P. K., R. J. F. Kumar, and J. M. Varkey, 2021. “Effect of artificial ageing treatment and precipitation on mechanical properties and fracture mechanism of friction stir processed MgZn2 and Al3Sc phases in aluminium alloy”, Materials Today: Proceedings 46. 10, 4982-4987. https://doi.org/10.1016/j.matpr.2020.10.389

Lan, J., X. Shen, J. Liu, and L. Hua, 2019. “Strengthening mechanisms of 2A14 aluminum alloy with cold deformation prior to artificial aging”, Materials Science and Engineering: A 745, 517-535. https://doi.org/10.1016/j.msea.2018.12.051

Savrai, R. A., and P. A. Skorynina, 2022. “Structural-phase transformations and changes in the properties of AISI 321 stainless steel induced by liquid carburizing at low temperature”, Surface and Coatings Technology 443, 128613. https://doi.org/10.1016/j.surfcoat.2022.128613

Supriyono, 2018. “The effects of pack carburizing using charcoal on properties of mild steel”, Media Mesin: Majalah Teknik Mesin 19. 1, 38-42. http://dx.doi.org/10.23917/mesin.v19i1.5812

Gubicza, J., M. El-Tahawy, J. L. Lábár, E. V. Bobruk, M. Y. Murashkin, R. Z. Valiev, and N. Q. Chinh, 2020. Evolution of microstructure and hardness during artificial aging of an ultrafine-grained Al-Zn-Mg-Zr alloy processed by high pressure torsion. Journal of Materials Science 55. 35, 16791–16805. https://doi.org/10.1007/s10853-020-05264-4

Westermann, I., K. O. Pedersen, T. Børvik, and O. S. Hopperstad, 2016. “Work-hardening and ductility of artificially aged AA6060 aluminium alloy”, Mechanics of Materials 97, 100-117. https://doi.org/10.1016/j.mechmat.2016.02.017

Joseph, R. N. A., K. A. J. Ahmed, M. M. Rizwaan, and C. Rajendran, 2021. “Effect of artificial ageing on microstructural behaviour of friction stir welded AA2014 aluminium alloy joints”, Materials Today: Proceedings 45. 2, 891-894. https://doi.org/10.1016/j.matpr.2020.02.937

Riyadi, T. W. B., 2017. “Mechanical Properties of Cu Surface in The Laminated Structure of Cr-Cu Coatings”, Media Mesin: Majalah Teknik Mesin 18. 1, 8-13. https://doi.org/10.23917/mesin.v18i1.3944

Kholis, N., N. Nuryanto, and A. Mustofa, 2020. “Characteristics of hardness and microstructure of extraction forceps for dental and oral care made of stainless-steel”, Applied Research and Smart Technology 1. 2, 56-63. https://doi.org/10.23917/arstech.v1i2.184

Hendrawan, M. A., P. I. Purboputro, and A. Prima, 2021. Use of zinc powder on Resistance Spot Welding on Mild Steel and aluminium”, Journal of Physics: Conference Series 1858, 012051. https://doi.org/10.1088/1742-6596/1858/1/012051

Wijianto, R. M. D. Ibnu, and H. Adityarini, 2019. “Effect of NaOH Concentration Treatment on Tensile Strength, Flexure Strength and Elasticity Modulus of Banana Fiber Reinforced Polyester Resin”, Materials Science Forum 961, 10-15. https://doi.org/10.4028/www.scientific.net/MSF.961.10

DOI: 10.23917/mesin.v23i2.19347

Article Metrics

Abstract view(s): 357 time(s)
PDF: 355 time(s)

Refbacks

  • There are currently no refbacks.