PENAMBAHAN SATU LANTAI TINGKAT PADA PORTAL GEDUNG BETON BERTULANG TIGA LANTAI

Ali Asroni(1*)

(1) Universitas Muhammadiyah Surakarta
(*) Corresponding Author

Abstract

The aim of this research was to compare three and four floors of reinforce concrete portal design, and the  possibility of the addition of one floor above the three floors building based on building safety. Research was carried out by taking the example of two office building portals constructed in the earthquake zone-one. Both portals were made from the same sketch plan and designed in the full elastic system. The load combinations (dead load, live load, and earthquake load) were subjected to both portals. The loads complied with the Indonesian Code (Tatacara Perhitungan Struktur Beton Untuk Bangunan Gedung, SNI 03-2847-2002). The dimension of portal structures (beam, column, sloof, and foundations) and their reinforcements were properly designed to carry the loads. Based on the dimension of portal and their reinforcement obtained, a comparison could be made up of total reinforcing and spacing of begel on both portals, and the possibility of the addition of one floor above the three floors building. The results showed that the dimensions of the structure (column, sloof, and foundation) of four floors portal were bigger than three floors, had greater number of total longitudinal reinforcement (include of beam), and the begel space of edge beam was more tightly. Moreover, the addition of one floor above the three floors would be dangerous for building safety  and users.

References

............, 2002. Tatacara Perhitungan Struktur Beton Untuk Bangunan Gedung, SK SNI 03-2847-2002, Panitia Teknik Standardisasi Bidang Konstruksi dan Bangunan, Bandung.

Asroni, A. 2009. Struktur Beton Lanjut, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Muhammadiyah Surakarta, Surakarta.

Asroni, A. 2010. Balok Dan Pelat Beton Bertulang, Cetakan pertama, P.T. Graha Ilmu, Yogyakarta.

Asroni, A. 2010. Kolom, Fondasi Dan Balok ”T” Beton Bertulang, Cetakan pertama, P.T. Graha Ilmu, Yogyakarta.

DPMB, 1971. Peraturan Beton Bertulang Indonesia Tahun 1971, PBI-1971, Dinas Pekerjaan Umum, Direktorat Penyelidikan Masalah Bangunan, Bandung.

DSN, 1989. Pedoman Perencanaan Pembebanan Untuk Rumah Dan Gedung, SNI 03-1727-1989, UDC, Dewan Standardisasi Nasional, Jakarta.

Kardiyono dan Budihardjo, 1980. Distribusi Momen Dengan Cara C.T. Morris (Cara Cross Pada Portal Dengan Satu Tabel), Teknik Sipil, UGM, Yogyakarta.

Kardiyono, 1981. Teknologi Gempa, Bahan Kuliah Teknik Sipil, UGM, Yogyakarta.

Kimpraswil, 2002. Standar Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung, Departemen Pemukiman Dan Prasarana Wilayah, Badan Penelitian Dan Pengem-bangan Pemukiman Dan Prasarana Wilayah, Pusat Penelitian Dan Pengembangan Tek-nologi Pemukiman, Bandung.

Vis, W.C. dan Kusuma, G.H., 1993. Dasar-dasar Perencanaan Beton Bertulang Berdasar-kan SK SNI T-15-1991-03, Seri Beton 1, Penerbit Erlangga, Jakarta.

Article Metrics

Abstract view(s): 280 time(s)

Refbacks

  • There are currently no refbacks.