PERFORMANCE ANALYSIS OF HEAT EXCHANGER AT PHOSPHATE ACID CONCENTRATED UNIT PT PETROCHEMICAL GRESIK
Erwan Adi Saputro(1*), Widiya Ningrum(2), Muhammad Faishal Ma’arif(3), AR Yelvia Sunarti(4)(1) Prodi Teknik Kimia UPN Veteran jawa Timur
(2) Department of Chemical Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur
(3) PT Petrokimia Gresik
(4) Department of Chemical Engineering, Faculty of Engineering, University of Pembangunan Nasional “Veteran” Jawa Timur
(*) Corresponding Author
Abstract
PT Petrokimia Gresik is the most complete fertilizer producing company and also produces fertilizer raw materials such as phosphoric acid. The process technology used in this company is Nissan C Process. One of the steps in this process is the phosphoric acid concentration unit. This unit consists of several steps such as evaporation, cooling, and fluorine scrubber. In the evaporation process, the most important equipment is the heat exchanger. As time goes by, it is necessary to evaluate the performance of this equipment. So, this case study aims to evaluate the performance of the heat exchanger, including the pressure of the heat exchanger the allowable pressure also to calculate the efficiency of the heat exchanger to determine whether the equipment is still suitable for use or not. Based on the calculation and analysis, obtained the pressure drop on the shell is 0.8817 psi, the pressure drop on the tube is 4.549 psi, and the efficiency of the equipment is 82.7%. So, it can be concluded that the heat exchanger used by PT Petrokimia Gresik is still suitable for use.
Keywords
Full Text:
PDFReferences
A. Chalim, A. Ariani, and M. A. Indra, “Efektivitas Heat Exchanger Shell and Tube 1-1 Sistem Fluida Gliserin - Air,” Pros. Semin. Nas. Rekayasa Proses Ind. Kim., vol. 4, pp. 14–17, 2020.
Azwinur and Zulkifli, “Kaji Eksperimental Pengaruh Baffle Pada Alat Penukar Panas Aliran Searah Dalam Upaya Optimasi Sistem Pengering,” SINTEK J. J. Ilm. Tek. Mesin, vol. 13, no. 1, p. 8, 2019, doi: 10.24853/sintek.13.1.8-14.
M. Furqon, Syukran, and Sariyusda, “Kaji Eksperimental Dan Analisa Kinerja Penukar Panas Udara Type Shell and Tube Jenis Aliran Berlawanan,” J. Mesin Sains Ter., vol. 4, p. 1, 2020.
S. Siagian, “Analisa Efektivitas Alat Penukar Kalor Jenis Shell and Tube Hasil Perencanaan Mahasiswa Skala Laboratorium,” Bina Tek., vol. 12, no. 2, p. 211, 2017, doi: 10.54378/bt.v12i2.75.
Y. Cengel, “Heat Transfer: A Practical Approach,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2013.
I. Bizzy and R. Setiadi, “Studi Perhitungan Alat Penukar Kalor Tipe Shell and Tube Dengan Program Heat Transfer Research Inc. ( Htri ),” J. Rekayasa Mesin Univ. Sriwij., vol. 13, no. 1, pp. 67–76, 2016.
A. Budiman, A. Syarief, and H. Isworo, “Analisis Perpindahan Panas dan Efisiensi Efektif High Pressure Heater (HPH) di PLTU Asam-Asam,” J. Ilm. Tek. Mesin Unlam, vol. 03, no. 2, pp. 76–82, 2014.
J. Sudrajat, “Bagian-Bagian Dalam Shell and Tube Heat Exchanger,” J. Tek. Mesin, vol. 6, no. 3, p. 174, 2017.
M. A. Imron, “Evaluasi Kinerja Heat Exchanger (E-1201) Shell and Tube Unit Asam Sulfat Departemen Produksi III B PT. Petrokimia Gresik.,” in Universitas Pembangunan Nasioanal Veteran Yogyakarta, 2018, p. Yogyakarta.
S. Hariyadi and E. A. Saputra, “Analisis Heat Exchanger Pada Gear Box Oli Reducer Dryer Di Pt. Petrokimia Gresik,” J. Keilmuan dan Terap. Tek., vol. 6, no. 1, pp. 16–23, 2017.
Y. M. V. Lebo, Gusnawati, and J. U. Jasron, “Analisa Unjuk Kerja Alat Penukar Kalor Tipe Shell And Tube Untuk Pendinginan Minyak Pelumas Pada Sistem Penggerak Induced Draft Fan,” J. Tek. Mesin, vol. 02, no. 02, pp. 59–64, 2015.
R. Salim amir, “DESAIN ULANG ALAT PENUKAR KALOR TIPE SHELL AND TUBE DENGAN MATERIAL TUBE CARBON STELL DAN STAINLESS STELL 304 Ratnawati 1 , Amir Salim 2,” vol. 7, no. 1, pp. 74–80, 2018.
D. Q. Kern, “Process Heat Transfer.,” in McGraw-Hill Book Company, 1950, p. Inc, New York.
B. Setyoko, “Evaluasi Kinerja Heat Exchanger dengan Metode Fouling Faktor,” J. Tek., vol. 29, no. 2, 2008.
F. Kreith, “Prinsip-prinsip Perpindahan Panas, ” Ed. Ketiga. Erlangga Jakarta., 1997.
Article Metrics
Abstract view(s): 621 time(s)PDF: 782 time(s)
Refbacks
- There are currently no refbacks.