STUDI OPTIMASI TOPOLOGI PADA FALL BLOCK DECK CRANE KAPASITAS 30 TON MENGGUNAKAN METODE ELEMEN HINGGA
Nurul Huda(1*), Ocid Mursid(2), Akhmad Nurfauzi(3)(1) Program Studi Mekanisasi Perikanan Politeknik Kelautan dan Perikanan Sorong
(2) Program Studi Teknik Perkapalan, Universitas Diponegoro
(3) Program Studi Mekanisasi Perikanan, Politeknik Kelautan dan Perikanan Sorong
(*) Corresponding Author
Abstract
Keywords
Full Text:
PDF (Bahasa Indonesia)References
The Bechtel Equipment Operations Rigging Department, Bechtel Rigging Handbook (Second Edition), 2nd ed. Bechtel Equipment Operations, Inc., 2002.
Dai R J,Liu Y,Cheng Y S,et al., “Topology and Opening Size Optimization Design of Solid Floors in An Outer Tank of The Pressure Hull,” Chinese J. Sh. Res., vol. 14(6), pp. 139–146, 2019.
Z. H. Deqing, “Typical Shape and Topology Optimization Design of The Ship Grillage Structure,” Chinese J. Sh. Res., vol. 10(6), pp. 27-33,59, 2015.
C. Y. T. Jun, “Topology optimization of ship bracket structures,” Chinese J. Sh. Res., vol. 10(5), pp. 53-58,70, 2015.
S. H. Suryo, R. S. Sastra, Muchammad, and Harto, “Optimization of bucket tooth excavator design using topology optimization and finite element method,” J. Phys. Conf. Ser., vol. 1858, no. 1, 2021, doi: 10.1088/1742-6596/1858/1/012081.
S. Slavov and M. Konsulova-Bakalova, “Optimizing weight of housing elements of two-stage reducer by using the topology management optimization capabilities integrated in SOLIDWORKS: A case study,” Machines, vol. 7, no. 1, 2019, doi: 10.3390/machines7010009.
J.-H. Songr et al., “Lightweight design for windlass base frame using optimal design technique,” J. Korean Soc. Mar. Eng., vol. 37, no. 5, pp. 477–483, 2013, doi: 10.5916/jkosme.2013.37.5.477.
X. Zhao, Y. Liu, L. Hua, and H. Mao, “Finite element analysis and topology optimization of a 12000KN fine blanking press frame,” Struct. Multidiscip. Optim., vol. 54, no. 2, pp. 375–389, 2016, doi: 10.1007/s00158-016-1407-4.
“Goals and Constraints - 2018 - SOLIDWORKS Help.” https://help.solidworks.com/2018/English/SolidWorks/cworks/hidd_goals_constraints.htm?id=eeda6362756f4ff090ce3a44c7a343fb#Pg0 (accessed Sep. 17, 2021).
“Manufacturing Controls - 2018 - SOLIDWORKS Help.” https://help.solidworks.com/2018/English/SolidWorks/cworks/c_manufacturing_controls_topology.htm?id=1a7fb1812efd482eaa96508182dc6503#Pg0 (accessed Sep. 17, 2021).
Article Metrics
Abstract view(s): 422 time(s)PDF (Bahasa Indonesia): 523 time(s)